Endless exceptions in 216

I just installed build 216 for VS2005 (the first time I've installed a build
in a while, and first time on 2005)

During installation, when the console window came up, it looked like there
was some sort of exception in there... but it flashed by too briefly for me
to be sure or to get any other info about it. But that was something that
concerned me and thought you should know about it even if I can't give you
any further details.

After installation, I started up VS2005, and opened my usual working
solution (several projects, tons of files). Immediately I got the Resharper
exception dialog. I submitted it (successfully), and then dismissed it with
the "ignore further exceptions" check box. It then proceeded to chug away,
with the "More exceptions have occured" bar flashing in the bottom,
endlessly, several times a second, for MINUTES and MINUTES, while pegging
the CPU at around 60% usage.

Even as I write this, that exception bar is still flashing, indicating
they're happening over and over and over again.... presumably the same
exception.

I'm waiting to see if it ever starts actually analyzing any of my source
code, but for now, the only indication that Resharper is loaded is the
vertical scrollbar (after looking 'normal' for a while) finally moved over
and the erorr bar has been painted (but is blank, along with the red/green
status square... which says "Analysis will begin shortly").

While I can technically continue working, some other things aren't working
right and I don't know if it's because I have to wait for analysis to be
complete (and all those exceptions to stop... they're still going) or what.
But if I try to "Go To Class" with Ctrl+N and type in the name of a class
that is in my solution, in fact in the same project as the file I'm
currently viewing, and which is in fact already open in a tab, it still
takes me to the Object Browser, not to the class file. That's a problem...
even though all my "references" are DLL references, the fact that I'm in the
very same project and the file is already open in a tab means it should be
able to find the actual source I would think. Of course, it should work
even though I have DLL references and not Project references regardless...
is that support in yet?

I'm afraid this is as far as I'll be able to get with testing. I'm going to
have to uninstall and work resharperless until these exceptions are fixed.
And so far it's been about 20 minutes and there's no sign it's going to stop
throwing those exceptions or ever get around to analyzing my code, so I'm
just going to have to stop here, exit, and uninstall. Sorry! But 216 seems
completely unusable.

- Paul


5 comments
Comment actions Permalink

Please, could you give the number of the very first exception. We should
focus on it, since it is obvious that others are just the consequence...

--
Eugene Pasynkov
Developer
JetBrains, Inc
http://www.jetbrains.com
"Develop with pleasure!"
"Paul Bradshaw" <pbradshaw@advsol.com> wrote in message
news:dsaii7$p73$1@is.intellij.net...
>I just installed build 216 for VS2005 (the first time I've installed a
>build in a while, and first time on 2005)
>

During installation, when the console window came up, it looked like there
was some sort of exception in there... but it flashed by too briefly for
me to be sure or to get any other info about it. But that was something
that concerned me and thought you should know about it even if I can't
give you any further details.

>

After installation, I started up VS2005, and opened my usual working
solution (several projects, tons of files). Immediately I got the
Resharper exception dialog. I submitted it (successfully), and then
dismissed it with the "ignore further exceptions" check box. It then
proceeded to chug away, with the "More exceptions have occured" bar
flashing in the bottom, endlessly, several times a second, for MINUTES and
MINUTES, while pegging the CPU at around 60% usage.

>

Even as I write this, that exception bar is still flashing, indicating
they're happening over and over and over again.... presumably the same
exception.

>

I'm waiting to see if it ever starts actually analyzing any of my source
code, but for now, the only indication that Resharper is loaded is the
vertical scrollbar (after looking 'normal' for a while) finally moved over
and the erorr bar has been painted (but is blank, along with the red/green
status square... which says "Analysis will begin shortly").

>

While I can technically continue working, some other things aren't working
right and I don't know if it's because I have to wait for analysis to be
complete (and all those exceptions to stop... they're still going) or
what. But if I try to "Go To Class" with Ctrl+N and type in the name of a
class that is in my solution, in fact in the same project as the file I'm
currently viewing, and which is in fact already open in a tab, it still
takes me to the Object Browser, not to the class file. That's a
problem... even though all my "references" are DLL references, the fact
that I'm in the very same project and the file is already open in a tab
means it should be able to find the actual source I would think. Of
course, it should work even though I have DLL references and not Project
references regardless... is that support in yet?

>

I'm afraid this is as far as I'll be able to get with testing. I'm going
to have to uninstall and work resharperless until these exceptions are
fixed. And so far it's been about 20 minutes and there's no sign it's
going to stop throwing those exceptions or ever get around to analyzing my
code, so I'm just going to have to stop here, exit, and uninstall. Sorry!
But 216 seems completely unusable.

>

- Paul

>



0
Comment actions Permalink

Some more data for you:

I re-installed Resharper build 216 using VS2005. Just FYI, I have Resharper
1.51 installed in VS2003 on the same maching, but am not currently using
either (just in case that's relevant).

Opening a simple winform solution with one winform project works fine. No
exception.

Opening my existing solution that contains 10 projects and 1 "website"
causes the exception. Here is the sequence of events:

- Open the solution
- The solution opens and displays the source code (but with the regular
VS2005 screen, scrollbars, and colors)
- Resharper dialog pops up saying "Applying Changes...." and lists the first
project in my solution. This takes a while
- Resharper dialog goes away
- Screen repaints with Resharper coloring and the resharper error bar on the
right
- The exception occurs and the Resharper exception dialog pops up.
- The exception is Tracker #17127. It occurs endlessly, over and over,
until I shut down VS2005

"Index Out Of Range Exception in Metadata.Access.Blob.ReadUINT16(), Blob.cs
line 74"

There are lots of files under the 'website' node in the solution that
Resharper probably shouldn't be trying to parse (I dunno if that's it, but
it sort of seems like it MIGHT be the presence of the 'website' in the
solution that causes the problem?)

This is on the first time that I open this solution since installing
Resharper. There was previously no "_resharper*" folder or cache or
anything, so presumably it has to build that, not just read it in.

If there's any other information I can give to you that would prove helpful,
let me know. This one is a killer.


"Eugene Pasynkov (JetBrains)" <Eugene.Pasynkov@jetbrains.com> wrote in
message news:dsamga$hom$1@is.intellij.net...

Please, could you give the number of the very first exception. We should
focus on it, since it is obvious that others are just the consequence...

>

--
Eugene Pasynkov
Developer
JetBrains, Inc
http://www.jetbrains.com
"Develop with pleasure!"
"Paul Bradshaw" <pbradshaw@advsol.com> wrote in message
news:dsaii7$p73$1@is.intellij.net...

>>I just installed build 216 for VS2005 (the first time I've installed a
>>build in a while, and first time on 2005)
>>
>> During installation, when the console window came up, it looked like
>> there was some sort of exception in there... but it flashed by too
>> briefly for me to be sure or to get any other info about it. But that
>> was something that concerned me and thought you should know about it even
>> if I can't give you any further details.
>>
>> After installation, I started up VS2005, and opened my usual working
>> solution (several projects, tons of files). Immediately I got the
>> Resharper exception dialog. I submitted it (successfully), and then
>> dismissed it with the "ignore further exceptions" check box. It then
>> proceeded to chug away, with the "More exceptions have occured" bar
>> flashing in the bottom, endlessly, several times a second, for MINUTES
>> and MINUTES, while pegging the CPU at around 60% usage.
>>
>> Even as I write this, that exception bar is still flashing, indicating
>> they're happening over and over and over again.... presumably the same
>> exception.
>>
>> I'm waiting to see if it ever starts actually analyzing any of my source
>> code, but for now, the only indication that Resharper is loaded is the
>> vertical scrollbar (after looking 'normal' for a while) finally moved
>> over and the erorr bar has been painted (but is blank, along with the
>> red/green status square... which says "Analysis will begin shortly").
>>
>> While I can technically continue working, some other things aren't
>> working right and I don't know if it's because I have to wait for
>> analysis to be complete (and all those exceptions to stop... they're
>> still going) or what. But if I try to "Go To Class" with Ctrl+N and type
>> in the name of a class that is in my solution, in fact in the same
>> project as the file I'm currently viewing, and which is in fact already
>> open in a tab, it still takes me to the Object Browser, not to the class
>> file. That's a problem... even though all my "references" are DLL
>> references, the fact that I'm in the very same project and the file is
>> already open in a tab means it should be able to find the actual source I
>> would think. Of course, it should work even though I have DLL references
>> and not Project references regardless... is that support in yet?
>>
>> I'm afraid this is as far as I'll be able to get with testing. I'm going
>> to have to uninstall and work resharperless until these exceptions are
>> fixed. And so far it's been about 20 minutes and there's no sign it's
>> going to stop throwing those exceptions or ever get around to analyzing
>> my code, so I'm just going to have to stop here, exit, and uninstall.
>> Sorry! But 216 seems completely unusable.
>>
>> - Paul
>>
>>
>



0
Comment actions Permalink

Also, I tried to pay more close attention to the install progress and what
happened in the console window, and I don't think an exception is occuring
there... it's just rapidly displaying some information and it scrolls up the
console window a bit before quickly disappearing. It's too fast to catch,
but I'm pretty sure my initial impression that an exception occured during
installation was not correct, so ignore that part.


"Eugene Pasynkov (JetBrains)" <Eugene.Pasynkov@jetbrains.com> wrote in
message news:dsamga$hom$1@is.intellij.net...

Please, could you give the number of the very first exception. We should
focus on it, since it is obvious that others are just the consequence...

>

--
Eugene Pasynkov
Developer
JetBrains, Inc
http://www.jetbrains.com
"Develop with pleasure!"
"Paul Bradshaw" <pbradshaw@advsol.com> wrote in message
news:dsaii7$p73$1@is.intellij.net...

>>I just installed build 216 for VS2005 (the first time I've installed a
>>build in a while, and first time on 2005)
>>
>> During installation, when the console window came up, it looked like
>> there was some sort of exception in there... but it flashed by too
>> briefly for me to be sure or to get any other info about it. But that
>> was something that concerned me and thought you should know about it even
>> if I can't give you any further details.
>>
>> After installation, I started up VS2005, and opened my usual working
>> solution (several projects, tons of files). Immediately I got the
>> Resharper exception dialog. I submitted it (successfully), and then
>> dismissed it with the "ignore further exceptions" check box. It then
>> proceeded to chug away, with the "More exceptions have occured" bar
>> flashing in the bottom, endlessly, several times a second, for MINUTES
>> and MINUTES, while pegging the CPU at around 60% usage.
>>
>> Even as I write this, that exception bar is still flashing, indicating
>> they're happening over and over and over again.... presumably the same
>> exception.
>>
>> I'm waiting to see if it ever starts actually analyzing any of my source
>> code, but for now, the only indication that Resharper is loaded is the
>> vertical scrollbar (after looking 'normal' for a while) finally moved
>> over and the erorr bar has been painted (but is blank, along with the
>> red/green status square... which says "Analysis will begin shortly").
>>
>> While I can technically continue working, some other things aren't
>> working right and I don't know if it's because I have to wait for
>> analysis to be complete (and all those exceptions to stop... they're
>> still going) or what. But if I try to "Go To Class" with Ctrl+N and type
>> in the name of a class that is in my solution, in fact in the same
>> project as the file I'm currently viewing, and which is in fact already
>> open in a tab, it still takes me to the Object Browser, not to the class
>> file. That's a problem... even though all my "references" are DLL
>> references, the fact that I'm in the very same project and the file is
>> already open in a tab means it should be able to find the actual source I
>> would think. Of course, it should work even though I have DLL references
>> and not Project references regardless... is that support in yet?
>>
>> I'm afraid this is as far as I'll be able to get with testing. I'm going
>> to have to uninstall and work resharperless until these exceptions are
>> fixed. And so far it's been about 20 minutes and there's no sign it's
>> going to stop throwing those exceptions or ever get around to analyzing
>> my code, so I'm just going to have to stop here, exit, and uninstall.
>> Sorry! But 216 seems completely unusable.
>>
>> - Paul
>>
>>
>



0
Comment actions Permalink

Hello Paul,

thanks a lot for your information. We suppressed the initial exception 17127
in 217, and
are going to publish the latter ASAP.


Regards,
Dmitry Shaporenkov
JetBrains, Inc
http://www.jetbrains.com
"Develop with pleasure!"

Some more data for you:

I re-installed Resharper build 216 using VS2005. Just FYI, I have
Resharper 1.51 installed in VS2003 on the same maching, but am not
currently using either (just in case that's relevant).

Opening a simple winform solution with one winform project works fine.
No exception.

Opening my existing solution that contains 10 projects and 1 "website"
causes the exception. Here is the sequence of events:

- Open the solution
- The solution opens and displays the source code (but with the
regular
VS2005 screen, scrollbars, and colors)
- Resharper dialog pops up saying "Applying Changes...." and lists the
first
project in my solution. This takes a while
- Resharper dialog goes away
- Screen repaints with Resharper coloring and the resharper error bar
on the
right
- The exception occurs and the Resharper exception dialog pops up.
- The exception is Tracker #17127. It occurs endlessly, over and
over,
until I shut down VS2005
"Index Out Of Range Exception in Metadata.Access.Blob.ReadUINT16(),
Blob.cs line 74"

There are lots of files under the 'website' node in the solution that
Resharper probably shouldn't be trying to parse (I dunno if that's it,
but it sort of seems like it MIGHT be the presence of the 'website' in
the solution that causes the problem?)

This is on the first time that I open this solution since installing
Resharper. There was previously no "_resharper*" folder or cache or
anything, so presumably it has to build that, not just read it in.

If there's any other information I can give to you that would prove
helpful, let me know. This one is a killer.

"Eugene Pasynkov (JetBrains)" <Eugene.Pasynkov@jetbrains.com> wrote in
message news:dsamga$hom$1@is.intellij.net...

>> Please, could you give the number of the very first exception. We
>> should focus on it, since it is obvious that others are just the
>> consequence...
>>
>> --
>> Eugene Pasynkov
>> Developer
>> JetBrains, Inc
>> http://www.jetbrains.com
>> "Develop with pleasure!"
>> "Paul Bradshaw" <pbradshaw@advsol.com> wrote in message
>> news:dsaii7$p73$1@is.intellij.net...
>>> I just installed build 216 for VS2005 (the first time I've installed
>>> a build in a while, and first time on 2005)
>>>
>>> During installation, when the console window came up, it looked like
>>> there was some sort of exception in there... but it flashed by too
>>> briefly for me to be sure or to get any other info about it. But
>>> that was something that concerned me and thought you should know
>>> about it even if I can't give you any further details.
>>>
>>> After installation, I started up VS2005, and opened my usual working
>>> solution (several projects, tons of files). Immediately I got the
>>> Resharper exception dialog. I submitted it (successfully), and then
>>> dismissed it with the "ignore further exceptions" check box. It
>>> then proceeded to chug away, with the "More exceptions have occured"
>>> bar flashing in the bottom, endlessly, several times a second, for
>>> MINUTES and MINUTES, while pegging the CPU at around 60% usage.
>>>
>>> Even as I write this, that exception bar is still flashing,
>>> indicating they're happening over and over and over again....
>>> presumably the same exception.
>>>
>>> I'm waiting to see if it ever starts actually analyzing any of my
>>> source code, but for now, the only indication that Resharper is
>>> loaded is the vertical scrollbar (after looking 'normal' for a
>>> while) finally moved over and the erorr bar has been painted (but is
>>> blank, along with the red/green status square... which says
>>> "Analysis will begin shortly").
>>>
>>> While I can technically continue working, some other things aren't
>>> working right and I don't know if it's because I have to wait for
>>> analysis to be complete (and all those exceptions to stop... they're
>>> still going) or what. But if I try to "Go To Class" with Ctrl+N and
>>> type in the name of a class that is in my solution, in fact in the
>>> same project as the file I'm currently viewing, and which is in fact
>>> already open in a tab, it still takes me to the Object Browser, not
>>> to the class file. That's a problem... even though all my
>>> "references" are DLL references, the fact that I'm in the very same
>>> project and the file is already open in a tab means it should be
>>> able to find the actual source I would think. Of course, it should
>>> work even though I have DLL references and not Project references
>>> regardless... is that support in yet?
>>>
>>> I'm afraid this is as far as I'll be able to get with testing. I'm
>>> going to have to uninstall and work resharperless until these
>>> exceptions are fixed. And so far it's been about 20 minutes and
>>> there's no sign it's going to stop throwing those exceptions or ever
>>> get around to analyzing my code, so I'm just going to have to stop
>>> here, exit, and uninstall. Sorry! But 216 seems completely unusable.
>>>
>>> - Paul
>>>


0
Comment actions Permalink

Alas, 217 doesn't fix the problem entirely. I get about the same error at
about the same time, only when it posted to Tracker, it posted with a new
number: 17323

The problem and symptoms still exist as before. If there's anything else I
can do to help you fix this issue, please let me know. I appreciate the
effort of getting 217 out so quickly, but I'm sorry that it just got past
one bug right into the very next, with ultimately no improvement in the
end-result. Hopefully the stack trace will give you enough clues to locate
this one.

BTW, there's a very long pause between loading the solution and displaying
the source code in the window (last open file), and when the Reshaper
"Applying Changes" dialog comes up. During this time, the UI is completly
unresponsive. It seems like Resharper is doing something, but there's no
progress dialog or indication that you can't just start working... except
that the UI still looks like VS2005 (without Resharper changes like the
error gutter on the right) and that it's unresponsive. It's a minor
usability issue, but I wanted to make sure you were aware of it.


"Dmitry Shaporenkov (JetBrains)" <dsha@jetbrains.com> wrote in message
news:c8a894d9fa8a08c7fa50752d91fe@news.intellij.net...

Hello Paul,

>

thanks a lot for your information. We suppressed the initial exception
17127 in 217, and are going to publish the latter ASAP.

>
>

Regards,
Dmitry Shaporenkov
JetBrains, Inc
http://www.jetbrains.com
"Develop with pleasure!"

>
>> Some more data for you:
>>
>> I re-installed Resharper build 216 using VS2005. Just FYI, I have
>> Resharper 1.51 installed in VS2003 on the same maching, but am not
>> currently using either (just in case that's relevant).
>>
>> Opening a simple winform solution with one winform project works fine.
>> No exception.
>>
>> Opening my existing solution that contains 10 projects and 1 "website"
>> causes the exception. Here is the sequence of events:
>>
>> - Open the solution
>> - The solution opens and displays the source code (but with the
>> regular
>> VS2005 screen, scrollbars, and colors)
>> - Resharper dialog pops up saying "Applying Changes...." and lists the
>> first
>> project in my solution. This takes a while
>> - Resharper dialog goes away
>> - Screen repaints with Resharper coloring and the resharper error bar
>> on the
>> right
>> - The exception occurs and the Resharper exception dialog pops up.
>> - The exception is Tracker #17127. It occurs endlessly, over and
>> over,
>> until I shut down VS2005
>> "Index Out Of Range Exception in Metadata.Access.Blob.ReadUINT16(),
>> Blob.cs line 74"
>>
>> There are lots of files under the 'website' node in the solution that
>> Resharper probably shouldn't be trying to parse (I dunno if that's it,
>> but it sort of seems like it MIGHT be the presence of the 'website' in
>> the solution that causes the problem?)
>>
>> This is on the first time that I open this solution since installing
>> Resharper. There was previously no "_resharper*" folder or cache or
>> anything, so presumably it has to build that, not just read it in.
>>
>> If there's any other information I can give to you that would prove
>> helpful, let me know. This one is a killer.
>>
>> "Eugene Pasynkov (JetBrains)" <Eugene.Pasynkov@jetbrains.com> wrote in
>> message news:dsamga$hom$1@is.intellij.net...
>>
>>> Please, could you give the number of the very first exception. We
>>> should focus on it, since it is obvious that others are just the
>>> consequence...
>>>
>>> --
>>> Eugene Pasynkov
>>> Developer
>>> JetBrains, Inc
>>> http://www.jetbrains.com
>>> "Develop with pleasure!"
>>> "Paul Bradshaw" <pbradshaw@advsol.com> wrote in message
>>> news:dsaii7$p73$1@is.intellij.net...
>>>> I just installed build 216 for VS2005 (the first time I've installed
>>>> a build in a while, and first time on 2005)
>>>>
>>>> During installation, when the console window came up, it looked like
>>>> there was some sort of exception in there... but it flashed by too
>>>> briefly for me to be sure or to get any other info about it. But
>>>> that was something that concerned me and thought you should know
>>>> about it even if I can't give you any further details.
>>>>
>>>> After installation, I started up VS2005, and opened my usual working
>>>> solution (several projects, tons of files). Immediately I got the
>>>> Resharper exception dialog. I submitted it (successfully), and then
>>>> dismissed it with the "ignore further exceptions" check box. It
>>>> then proceeded to chug away, with the "More exceptions have occured"
>>>> bar flashing in the bottom, endlessly, several times a second, for
>>>> MINUTES and MINUTES, while pegging the CPU at around 60% usage.
>>>>
>>>> Even as I write this, that exception bar is still flashing,
>>>> indicating they're happening over and over and over again....
>>>> presumably the same exception.
>>>>
>>>> I'm waiting to see if it ever starts actually analyzing any of my
>>>> source code, but for now, the only indication that Resharper is
>>>> loaded is the vertical scrollbar (after looking 'normal' for a
>>>> while) finally moved over and the erorr bar has been painted (but is
>>>> blank, along with the red/green status square... which says
>>>> "Analysis will begin shortly").
>>>>
>>>> While I can technically continue working, some other things aren't
>>>> working right and I don't know if it's because I have to wait for
>>>> analysis to be complete (and all those exceptions to stop... they're
>>>> still going) or what. But if I try to "Go To Class" with Ctrl+N and
>>>> type in the name of a class that is in my solution, in fact in the
>>>> same project as the file I'm currently viewing, and which is in fact
>>>> already open in a tab, it still takes me to the Object Browser, not
>>>> to the class file. That's a problem... even though all my
>>>> "references" are DLL references, the fact that I'm in the very same
>>>> project and the file is already open in a tab means it should be
>>>> able to find the actual source I would think. Of course, it should
>>>> work even though I have DLL references and not Project references
>>>> regardless... is that support in yet?
>>>>
>>>> I'm afraid this is as far as I'll be able to get with testing. I'm
>>>> going to have to uninstall and work resharperless until these
>>>> exceptions are fixed. And so far it's been about 20 minutes and
>>>> there's no sign it's going to stop throwing those exceptions or ever
>>>> get around to analyzing my code, so I'm just going to have to stop
>>>> here, exit, and uninstall. Sorry! But 216 seems completely unusable.
>>>>
>>>> - Paul
>>>>
>



0

Please sign in to leave a comment.