custom toolbars are gone after installation

Hi
I checked out R# 2.0 this morning and found some oddness. Most of them are
already mentioned by others here in the newsgroup (i.e. slow startup of
VS2003, magenta lightbulb, ...)

I am using a lot of custom toolbars which are created by myself. But after
the installation of R# 2.0 they are all gone! That's bad. I invested a
couple of hours in building these toolbars, they are a great timesaver for
my work. Do you know how I can save them before installation of R# and
restore them after the installation?

Is there a new R# 2.0 Default Keymap available as for 1.5 ?

Thanks for R#. It is a great tool.

Bye
Michael


24 comments
Comment actions Permalink

Michael,

Are the toolbars destroyed, or the just removed from toolbar?
Do they exist in Tools->Customize menu?

I am using a lot of custom toolbars which are created by myself. But after
the installation of R# 2.0 they are all gone! That's bad. I invested a
couple of hours in building these toolbars, they are a great timesaver for
my work. Do you know how I can save them before installation of R# and
restore them after the installation?


--
Sergey V. Coox
JetBrains, Inc
http://www.jetbrains.com
"Develop with pleasure!"


0
Comment actions Permalink

Hi Sergey

No, they are destroyed, not only removed.

"Sergey V. Coox" <qx@intellij.com> wrote in message
news:dblb6l$4aq$1@is.intellij.net...

Michael,

>

Are the toolbars destroyed, or the just removed from toolbar?
Do they exist in Tools->Customize menu?

>
>> I am using a lot of custom toolbars which are created by myself. But
>> after the installation of R# 2.0 they are all gone! That's bad. I
>> invested a couple of hours in building these toolbars, they are a great
>> timesaver for my work. Do you know how I can save them before
>> installation of R# and restore them after the installation?
>

--
Sergey V. Coox
JetBrains, Inc
http://www.jetbrains.com
"Develop with pleasure!"



0
Comment actions Permalink

Michael ,

Very strange. We do nothing with toolbars, the only thing we do is adding
our commands into main menu and remove bindings from some commands.

--
Sergey V. Coox
JetBrains, Inc
http://www.jetbrains.com
"Develop with pleasure!"


0
Comment actions Permalink

Maybe you are resetting some settings and the toolbars are effected too?

"Sergey V. Coox" <qx@intellij.com> wrote in message
news:dblbrh$70s$1@is.intellij.net...

Michael ,

>

Very strange. We do nothing with toolbars, the only thing we do is adding
our commands into main menu and remove bindings from some commands.

>

--
Sergey V. Coox
JetBrains, Inc
http://www.jetbrains.com
"Develop with pleasure!"



0
Comment actions Permalink

I don't have custom toolbars but I did have custom buttons added to existing
toolbars.

They were lost after installing 201.

Immediately after the new install, I got a error when starting VS (2003) and
had to start it again. That's when the toolbar mods were gone.

PS How about adding a way to save the existing toolbar configuration so it
could be restored in cases like this? This has always been annoying.

Thanks,

Jeff

"Michael Reukauff" <mreukauff@gmx.net> wrote in message
news:dbla65$vj5$1@is.intellij.net...

Hi
I checked out R# 2.0 this morning and found some oddness. Most of them are
already mentioned by others here in the newsgroup (i.e. slow startup of
VS2003, magenta lightbulb, ...)

>

I am using a lot of custom toolbars which are created by myself. But after
the installation of R# 2.0 they are all gone! That's bad. I invested a
couple of hours in building these toolbars, they are a great timesaver for
my work. Do you know how I can save them before installation of R# and
restore them after the installation?

>

Is there a new R# 2.0 Default Keymap available as for 1.5 ?

>

Thanks for R#. It is a great tool.

>

Bye
Michael



0
Comment actions Permalink

Guys!

I will investigate the problem.
One more question: do You experience the problem in VS2003 or VS2005 or
both?

--
Sergey V. Coox
JetBrains, Inc
http://www.jetbrains.com
"Develop with pleasure!"
"Michael Reukauff" <mreukauff@gmx.net> wrote in message
news:dbla65$vj5$1@is.intellij.net...

Hi
I checked out R# 2.0 this morning and found some oddness. Most of them are
already mentioned by others here in the newsgroup (i.e. slow startup of
VS2003, magenta lightbulb, ...)

>

I am using a lot of custom toolbars which are created by myself. But after
the installation of R# 2.0 they are all gone! That's bad. I invested a
couple of hours in building these toolbars, they are a great timesaver for
my work. Do you know how I can save them before installation of R# and
restore them after the installation?

>

Is there a new R# 2.0 Default Keymap available as for 1.5 ?

>

Thanks for R#. It is a great tool.

>

Bye
Michael



0
Comment actions Permalink

For me it's VS2003


"Sergey V. Coox" <qx@intellij.com> wrote in message
news:dbljfb$ite$1@is.intellij.net...

Guys!

>

I will investigate the problem.
One more question: do You experience the problem in VS2003 or VS2005 or
both?

>

--
Sergey V. Coox
JetBrains, Inc
http://www.jetbrains.com
"Develop with pleasure!"
"Michael Reukauff" <mreukauff@gmx.net> wrote in message
news:dbla65$vj5$1@is.intellij.net...

>> Hi
>> I checked out R# 2.0 this morning and found some oddness. Most of them
>> are already mentioned by others here in the newsgroup (i.e. slow startup
>> of VS2003, magenta lightbulb, ...)
>>
>> I am using a lot of custom toolbars which are created by myself. But
>> after the installation of R# 2.0 they are all gone! That's bad. I
>> invested a couple of hours in building these toolbars, they are a great
>> timesaver for my work. Do you know how I can save them before
>> installation of R# and restore them after the installation?
>>
>> Is there a new R# 2.0 Default Keymap available as for 1.5 ?
>>
>> Thanks for R#. It is a great tool.
>>
>> Bye
>> Michael
>>
>



0
Comment actions Permalink

Same for me - VS2003
Also, I changed to toolbars, uninstalled build 201 and went back to buid
165 - They were gone again.

"Michael Reukauff" <mreukauff@gmx.net> wrote in message
news:dblko6$o1u$1@is.intellij.net...

For me it's VS2003

>
>

"Sergey V. Coox" <qx@intellij.com> wrote in message
news:dbljfb$ite$1@is.intellij.net...

>> Guys!
>>
>> I will investigate the problem.
>> One more question: do You experience the problem in VS2003 or VS2005 or
>> both?
>>
>> --
>> Sergey V. Coox
>> JetBrains, Inc
>> http://www.jetbrains.com
>> "Develop with pleasure!"
>> "Michael Reukauff" <mreukauff@gmx.net> wrote in message
>> news:dbla65$vj5$1@is.intellij.net...
>>> Hi
>>> I checked out R# 2.0 this morning and found some oddness. Most of them
>>> are already mentioned by others here in the newsgroup (i.e. slow startup
>>> of VS2003, magenta lightbulb, ...)
>>>
>>> I am using a lot of custom toolbars which are created by myself. But
>>> after the installation of R# 2.0 they are all gone! That's bad. I
>>> invested a couple of hours in building these toolbars, they are a great
>>> timesaver for my work. Do you know how I can save them before
>>> installation of R# and restore them after the installation?
>>>
>>> Is there a new R# 2.0 Default Keymap available as for 1.5 ?
>>>
>>> Thanks for R#. It is a great tool.
>>>
>>> Bye
>>> Michael
>>>
>>
>>
>



0
Comment actions Permalink

I had the same experience.

I since had to uninstall 2.0 and go back to 1.5. I experienced the same
problem there. After remaking some changes to the toolbars once 2.0 was
installed, uninstalling 2.0 and installing 1.5 caused those to be lost
again.

This is on VS.Net 2003.


"Jeff" <jeffwalsh@hotmail.com> wrote in message
news:dblhdo$9s9$1@is.intellij.net...
>I don't have custom toolbars but I did have custom buttons added to
>existing toolbars.
>

They were lost after installing 201.

>

Immediately after the new install, I got a error when starting VS (2003)
and had to start it again. That's when the toolbar mods were gone.

>

PS How about adding a way to save the existing toolbar configuration so it
could be restored in cases like this? This has always been annoying.

>

Thanks,

>

Jeff

>

"Michael Reukauff" <mreukauff@gmx.net> wrote in message
news:dbla65$vj5$1@is.intellij.net...

>> Hi
>> I checked out R# 2.0 this morning and found some oddness. Most of them
>> are already mentioned by others here in the newsgroup (i.e. slow startup
>> of VS2003, magenta lightbulb, ...)
>>
>> I am using a lot of custom toolbars which are created by myself. But
>> after the installation of R# 2.0 they are all gone! That's bad. I
>> invested a couple of hours in building these toolbars, they are a great
>> timesaver for my work. Do you know how I can save them before
>> installation of R# and restore them after the installation?
>>
>> Is there a new R# 2.0 Default Keymap available as for 1.5 ?
>>
>> Thanks for R#. It is a great tool.
>>
>> Bye
>> Michael
>>
>



0
Comment actions Permalink

Hello Paul,

Is this problem limited to toolbars? All my code-formatting options are disapearing
after each upgrade!

Ronnie

I had the same experience.

I since had to uninstall 2.0 and go back to 1.5. I experienced the
same problem there. After remaking some changes to the toolbars once
2.0 was installed, uninstalling 2.0 and installing 1.5 caused those to
be lost again.

This is on VS.Net 2003.

"Jeff" <jeffwalsh@hotmail.com> wrote in message
news:dblhdo$9s9$1@is.intellij.net...

>> I don't have custom toolbars but I did have custom buttons added to
>> existing toolbars.
>>
>> They were lost after installing 201.
>>
>> Immediately after the new install, I got a error when starting VS
>> (2003) and had to start it again. That's when the toolbar mods were
>> gone.
>>
>> PS How about adding a way to save the existing toolbar configuration
>> so it could be restored in cases like this? This has always been
>> annoying.
>>
>> Thanks,
>>
>> Jeff
>>
>> "Michael Reukauff" <mreukauff@gmx.net> wrote in message
>> news:dbla65$vj5$1@is.intellij.net...
>>
>>> Hi
>>> I checked out R# 2.0 this morning and found some oddness. Most of
>>> them
>>> are already mentioned by others here in the newsgroup (i.e. slow
>>> startup
>>> of VS2003, magenta lightbulb, ...)
>>> I am using a lot of custom toolbars which are created by myself. But
>>> after the installation of R# 2.0 they are all gone! That's bad. I
>>> invested a couple of hours in building these toolbars, they are a
>>> great timesaver for my work. Do you know how I can save them before
>>> installation of R# and restore them after the installation?
>>>
>>> Is there a new R# 2.0 Default Keymap available as for 1.5 ?
>>>
>>> Thanks for R#. It is a great tool.
>>>
>>> Bye
>>> Michael


0
Comment actions Permalink

Hello Ronnie,

it appears the problem with custom toolbars is discussed in two threads concurrently.
Look at the thread 'custom toolbars are gone again' started by Michael -
it seems we've
found a feasible workaround for this bug of VS 2003.


Regards,
Dmitry Shaporenkov
JetBrains, Inc
http://www.jetbrains.com
"Develop with pleasure!"

Hello Paul,

Is this problem limited to toolbars? All my code-formatting options
are disapearing after each upgrade!

Ronnie

>> I had the same experience.
>>
>> I since had to uninstall 2.0 and go back to 1.5. I experienced the
>> same problem there. After remaking some changes to the toolbars once
>> 2.0 was installed, uninstalling 2.0 and installing 1.5 caused those
>> to be lost again.
>>
>> This is on VS.Net 2003.
>>
>> "Jeff" <jeffwalsh@hotmail.com> wrote in message
>> news:dblhdo$9s9$1@is.intellij.net...
>>> I don't have custom toolbars but I did have custom buttons added to
>>> existing toolbars.
>>>
>>> They were lost after installing 201.
>>>
>>> Immediately after the new install, I got a error when starting VS
>>> (2003) and had to start it again. That's when the toolbar mods were
>>> gone.
>>>
>>> PS How about adding a way to save the existing toolbar configuration
>>> so it could be restored in cases like this? This has always been
>>> annoying.
>>>
>>> Thanks,
>>>
>>> Jeff
>>>
>>> "Michael Reukauff" <mreukauff@gmx.net> wrote in message
>>> news:dbla65$vj5$1@is.intellij.net...
>>>
>>>> Hi
>>>> I checked out R# 2.0 this morning and found some oddness. Most of
>>>> them
>>>> are already mentioned by others here in the newsgroup (i.e. slow
>>>> startup
>>>> of VS2003, magenta lightbulb, ...)
>>>> I am using a lot of custom toolbars which are created by myself.
>>>> But
>>>> after the installation of R# 2.0 they are all gone! That's bad. I
>>>> invested a couple of hours in building these toolbars, they are a
>>>> great timesaver for my work. Do you know how I can save them before
>>>> installation of R# and restore them after the installation?
>>>> Is there a new R# 2.0 Default Keymap available as for 1.5 ?
>>>>
>>>> Thanks for R#. It is a great tool.
>>>>
>>>> Bye
>>>> Michael


0
Comment actions Permalink

Hello Dmitry,

I have seen the workaround before - maybe I should have started a new thread.
I have noticed that when installing a new version I lose my R# code formatting
preferences (like # lines between classes etc.)

Ronnie

Hello Ronnie,

it appears the problem with custom toolbars is discussed in two
threads concurrently.
Look at the thread 'custom toolbars are gone again' started by Michael
-
it seems we've
found a feasible workaround for this bug of VS 2003.
Regards,
Dmitry Shaporenkov
JetBrains, Inc
http://www.jetbrains.com
"Develop with pleasure!"

>> Hello Paul,
>>
>> Is this problem limited to toolbars? All my code-formatting options
>> are disapearing after each upgrade!
>>
>> Ronnie
>>
>>> I had the same experience.
>>>
>>> I since had to uninstall 2.0 and go back to 1.5. I experienced the
>>> same problem there. After remaking some changes to the toolbars
>>> once 2.0 was installed, uninstalling 2.0 and installing 1.5 caused
>>> those to be lost again.
>>>
>>> This is on VS.Net 2003.
>>>
>>> "Jeff" <jeffwalsh@hotmail.com> wrote in message
>>> news:dblhdo$9s9$1@is.intellij.net...
>>>> I don't have custom toolbars but I did have custom buttons added to
>>>> existing toolbars.
>>>>
>>>> They were lost after installing 201.
>>>>
>>>> Immediately after the new install, I got a error when starting VS
>>>> (2003) and had to start it again. That's when the toolbar mods were
>>>> gone.
>>>>
>>>> PS How about adding a way to save the existing toolbar
>>>> configuration so it could be restored in cases like this? This has
>>>> always been annoying.
>>>>
>>>> Thanks,
>>>>
>>>> Jeff
>>>>
>>>> "Michael Reukauff" <mreukauff@gmx.net> wrote in message
>>>> news:dbla65$vj5$1@is.intellij.net...
>>>>
>>>>> Hi
>>>>> I checked out R# 2.0 this morning and found some oddness. Most of
>>>>> them
>>>>> are already mentioned by others here in the newsgroup (i.e. slow
>>>>> startup
>>>>> of VS2003, magenta lightbulb, ...)
>>>>> I am using a lot of custom toolbars which are created by myself.
>>>>> But
>>>>> after the installation of R# 2.0 they are all gone! That's bad. I
>>>>> invested a couple of hours in building these toolbars, they are a
>>>>> great timesaver for my work. Do you know how I can save them
>>>>> before
>>>>> installation of R# and restore them after the installation?
>>>>> Is there a new R# 2.0 Default Keymap available as for 1.5 ?
>>>>> Thanks for R#. It is a great tool.
>>>>>
>>>>> Bye
>>>>> Michael


0
Comment actions Permalink

Ronnie,

R# formatting preferences are kept in the UserSettings.xml file located in
your user directory. This file
should not be overwritten during installation. Could you please check next
time you install ReSharper if
it is not really overwritten for you?

Regards,
Dmitry Shaporenkov
JetBrains, Inc
http://www.jetbrains.com
"Develop with pleasure!"

Hello Dmitry,

I have seen the workaround before - maybe I should have started a new
thread. I have noticed that when installing a new version I lose my R#
code formatting preferences (like # lines between classes etc.)

Ronnie

>> Hello Ronnie,
>>
>> it appears the problem with custom toolbars is discussed in two
>> threads concurrently.
>> Look at the thread 'custom toolbars are gone again' started by
>> Michael
>> -
>> it seems we've
>> found a feasible workaround for this bug of VS 2003.
>> Regards,
>> Dmitry Shaporenkov
>> JetBrains, Inc
>> http://www.jetbrains.com
>> "Develop with pleasure!"
>>> Hello Paul,
>>>
>>> Is this problem limited to toolbars? All my code-formatting options
>>> are disapearing after each upgrade!
>>>
>>> Ronnie
>>>
>>>> I had the same experience.
>>>>
>>>> I since had to uninstall 2.0 and go back to 1.5. I experienced the
>>>> same problem there. After remaking some changes to the toolbars
>>>> once 2.0 was installed, uninstalling 2.0 and installing 1.5 caused
>>>> those to be lost again.
>>>>
>>>> This is on VS.Net 2003.
>>>>
>>>> "Jeff" <jeffwalsh@hotmail.com> wrote in message
>>>> news:dblhdo$9s9$1@is.intellij.net...
>>>>> I don't have custom toolbars but I did have custom buttons added
>>>>> to existing toolbars.
>>>>>
>>>>> They were lost after installing 201.
>>>>>
>>>>> Immediately after the new install, I got a error when starting VS
>>>>> (2003) and had to start it again. That's when the toolbar mods
>>>>> were gone.
>>>>>
>>>>> PS How about adding a way to save the existing toolbar
>>>>> configuration so it could be restored in cases like this? This has
>>>>> always been annoying.
>>>>>
>>>>> Thanks,
>>>>>
>>>>> Jeff
>>>>>
>>>>> "Michael Reukauff" <mreukauff@gmx.net> wrote in message
>>>>> news:dbla65$vj5$1@is.intellij.net...
>>>>>
>>>>>> Hi
>>>>>> I checked out R# 2.0 this morning and found some oddness. Most of
>>>>>> them
>>>>>> are already mentioned by others here in the newsgroup (i.e. slow
>>>>>> startup
>>>>>> of VS2003, magenta lightbulb, ...)
>>>>>> I am using a lot of custom toolbars which are created by myself.
>>>>>> But
>>>>>> after the installation of R# 2.0 they are all gone! That's bad. I
>>>>>> invested a couple of hours in building these toolbars, they are a
>>>>>> great timesaver for my work. Do you know how I can save them
>>>>>> before
>>>>>> installation of R# and restore them after the installation?
>>>>>> Is there a new R# 2.0 Default Keymap available as for 1.5 ?
>>>>>> Thanks for R#. It is a great tool.
>>>>>> Bye
>>>>>> Michael


0
Comment actions Permalink

Hello Dmitry,

It canged (and seemed to lose the 'CodeStyleSettings' section amongst others - see attached.

Ronnie

Ronnie,

R# formatting preferences are kept in the UserSettings.xml file
located in
your user directory. This file
should not be overwritten during installation. Could you please check
next
time you install ReSharper if
it is not really overwritten for you?
Regards,
Dmitry Shaporenkov
JetBrains, Inc
http://www.jetbrains.com
"Develop with pleasure!"

>> Hello Dmitry,
>>
>> I have seen the workaround before - maybe I should have started a new
>> thread. I have noticed that when installing a new version I lose my
>> R# code formatting preferences (like # lines between classes etc.)
>>
>> Ronnie
>>
>>> Hello Ronnie,
>>>
>>> it appears the problem with custom toolbars is discussed in two
>>> threads concurrently.
>>> Look at the thread 'custom toolbars are gone again' started by
>>> Michael
>>> -
>>> it seems we've
>>> found a feasible workaround for this bug of VS 2003.
>>> Regards,
>>> Dmitry Shaporenkov
>>> JetBrains, Inc
>>> http://www.jetbrains.com
>>> "Develop with pleasure!"
>>>> Hello Paul,
>>>>
>>>> Is this problem limited to toolbars? All my code-formatting options
>>>> are disapearing after each upgrade!
>>>>
>>>> Ronnie
>>>>
>>>>> I had the same experience.
>>>>>
>>>>> I since had to uninstall 2.0 and go back to 1.5. I experienced
>>>>> the same problem there. After remaking some changes to the
>>>>> toolbars once 2.0 was installed, uninstalling 2.0 and installing
>>>>> 1.5 caused those to be lost again.
>>>>>
>>>>> This is on VS.Net 2003.
>>>>>
>>>>> "Jeff" <jeffwalsh@hotmail.com> wrote in message
>>>>> news:dblhdo$9s9$1@is.intellij.net...
>>>>>> I don't have custom toolbars but I did have custom buttons added
>>>>>> to existing toolbars.
>>>>>>
>>>>>> They were lost after installing 201.
>>>>>>
>>>>>> Immediately after the new install, I got a error when starting VS
>>>>>> (2003) and had to start it again. That's when the toolbar mods
>>>>>> were gone.
>>>>>>
>>>>>> PS How about adding a way to save the existing toolbar
>>>>>> configuration so it could be restored in cases like this? This
>>>>>> has always been annoying.
>>>>>>
>>>>>> Thanks,
>>>>>>
>>>>>> Jeff
>>>>>>
>>>>>> "Michael Reukauff" <mreukauff@gmx.net> wrote in message
>>>>>> news:dbla65$vj5$1@is.intellij.net...
>>>>>>
>>>>>>> Hi
>>>>>>> I checked out R# 2.0 this morning and found some oddness. Most
>>>>>>> of
>>>>>>> them
>>>>>>> are already mentioned by others here in the newsgroup (i.e. slow
>>>>>>> startup
>>>>>>> of VS2003, magenta lightbulb, ...)
>>>>>>> I am using a lot of custom toolbars which are created by myself.
>>>>>>> But
>>>>>>> after the installation of R# 2.0 they are all gone! That's bad.
>>>>>>> I
>>>>>>> invested a couple of hours in building these toolbars, they are
>>>>>>> a
>>>>>>> great timesaver for my work. Do you know how I can save them
>>>>>>> before
>>>>>>> installation of R# and restore them after the installation?
>>>>>>> Is there a new R# 2.0 Default Keymap available as for 1.5 ?
>>>>>>> Thanks for R#. It is a great tool.
>>>>>>> Bye
>>>>>>> Michael



Attachment(s):
New UserSettings.xml
Old UserSettings.xml
0
Comment actions Permalink

Hello Ronnie,

Interestingly, the file changes again when VS is loaded/quit (attached).
I manually merged old/new and everything seems ok (attached)

Ronnie

Hello Dmitry,

It canged (and seemed to lose the 'CodeStyleSettings' section amongst
others - see attached.

Ronnie

>> Ronnie,
>>
>> R# formatting preferences are kept in the UserSettings.xml file
>> located in
>> your user directory. This file
>> should not be overwritten during installation. Could you please check
>> next
>> time you install ReSharper if
>> it is not really overwritten for you?
>> Regards,
>> Dmitry Shaporenkov
>> JetBrains, Inc
>> http://www.jetbrains.com
>> "Develop with pleasure!"
>>> Hello Dmitry,
>>>
>>> I have seen the workaround before - maybe I should have started a
>>> new thread. I have noticed that when installing a new version I lose
>>> my R# code formatting preferences (like # lines between classes
>>> etc.)
>>>
>>> Ronnie
>>>
>>>> Hello Ronnie,
>>>>
>>>> it appears the problem with custom toolbars is discussed in two
>>>> threads concurrently.
>>>> Look at the thread 'custom toolbars are gone again' started by
>>>> Michael
>>>> -
>>>> it seems we've
>>>> found a feasible workaround for this bug of VS 2003.
>>>> Regards,
>>>> Dmitry Shaporenkov
>>>> JetBrains, Inc
>>>> http://www.jetbrains.com
>>>> "Develop with pleasure!"
>>>>> Hello Paul,
>>>>>
>>>>> Is this problem limited to toolbars? All my code-formatting
>>>>> options are disapearing after each upgrade!
>>>>>
>>>>> Ronnie
>>>>>
>>>>>> I had the same experience.
>>>>>>
>>>>>> I since had to uninstall 2.0 and go back to 1.5. I experienced
>>>>>> the same problem there. After remaking some changes to the
>>>>>> toolbars once 2.0 was installed, uninstalling 2.0 and installing
>>>>>> 1.5 caused those to be lost again.
>>>>>>
>>>>>> This is on VS.Net 2003.
>>>>>>
>>>>>> "Jeff" <jeffwalsh@hotmail.com> wrote in message
>>>>>> news:dblhdo$9s9$1@is.intellij.net...
>>>>>>> I don't have custom toolbars but I did have custom buttons added
>>>>>>> to existing toolbars.
>>>>>>>
>>>>>>> They were lost after installing 201.
>>>>>>>
>>>>>>> Immediately after the new install, I got a error when starting
>>>>>>> VS (2003) and had to start it again. That's when the toolbar
>>>>>>> mods were gone.
>>>>>>>
>>>>>>> PS How about adding a way to save the existing toolbar
>>>>>>> configuration so it could be restored in cases like this? This
>>>>>>> has always been annoying.
>>>>>>>
>>>>>>> Thanks,
>>>>>>>
>>>>>>> Jeff
>>>>>>>
>>>>>>> "Michael Reukauff" <mreukauff@gmx.net> wrote in message
>>>>>>> news:dbla65$vj5$1@is.intellij.net...
>>>>>>>
>>>>>>>> Hi
>>>>>>>> I checked out R# 2.0 this morning and found some oddness. Most
>>>>>>>> of
>>>>>>>> them
>>>>>>>> are already mentioned by others here in the newsgroup (i.e.
>>>>>>>> slow
>>>>>>>> startup
>>>>>>>> of VS2003, magenta lightbulb, ...)
>>>>>>>> I am using a lot of custom toolbars which are created by
>>>>>>>> myself.
>>>>>>>> But
>>>>>>>> after the installation of R# 2.0 they are all gone! That's bad.
>>>>>>>> I
>>>>>>>> invested a couple of hours in building these toolbars, they are
>>>>>>>> a
>>>>>>>> great timesaver for my work. Do you know how I can save them
>>>>>>>> before
>>>>>>>> installation of R# and restore them after the installation?
>>>>>>>> Is there a new R# 2.0 Default Keymap available as for 1.5 ?
>>>>>>>> Thanks for R#. It is a great tool.
>>>>>>>> Bye
>>>>>>>> Michael



Attachment(s):
Merged UserSettings.xml
After Load and Quit UserSettings.xml
0
Comment actions Permalink

Hello Ronnie,

surely, this file is saved when you close VS, and loaded when you run it
or activate ReSharper - that's totally OK.
Are you sure that the file has been changed during installation and not later?
I would presume it should be kept in
its place during installation, then loaded into the VS/ReSharper with old
settings.

Regards,
Dmitry Shaporenkov
JetBrains, Inc
http://www.jetbrains.com
"Develop with pleasure!"

Hello Ronnie,

Interestingly, the file changes again when VS is loaded/quit
(attached). I manually merged old/new and everything seems ok
(attached)

Ronnie

>> Hello Dmitry,
>>
>> It canged (and seemed to lose the 'CodeStyleSettings' section amongst
>> others - see attached.
>>
>> Ronnie
>>
>>> Ronnie,
>>>
>>> R# formatting preferences are kept in the UserSettings.xml file
>>> located in
>>> your user directory. This file
>>> should not be overwritten during installation. Could you please
>>> check
>>> next
>>> time you install ReSharper if
>>> it is not really overwritten for you?
>>> Regards,
>>> Dmitry Shaporenkov
>>> JetBrains, Inc
>>> http://www.jetbrains.com
>>> "Develop with pleasure!"
>>>> Hello Dmitry,
>>>>
>>>> I have seen the workaround before - maybe I should have started a
>>>> new thread. I have noticed that when installing a new version I
>>>> lose my R# code formatting preferences (like # lines between
>>>> classes etc.)
>>>>
>>>> Ronnie
>>>>
>>>>> Hello Ronnie,
>>>>>
>>>>> it appears the problem with custom toolbars is discussed in two
>>>>> threads concurrently.
>>>>> Look at the thread 'custom toolbars are gone again' started by
>>>>> Michael
>>>>> -
>>>>> it seems we've
>>>>> found a feasible workaround for this bug of VS 2003.
>>>>> Regards,
>>>>> Dmitry Shaporenkov
>>>>> JetBrains, Inc
>>>>> http://www.jetbrains.com
>>>>> "Develop with pleasure!"
>>>>>> Hello Paul,
>>>>>>
>>>>>> Is this problem limited to toolbars? All my code-formatting
>>>>>> options are disapearing after each upgrade!
>>>>>>
>>>>>> Ronnie
>>>>>>
>>>>>>> I had the same experience.
>>>>>>>
>>>>>>> I since had to uninstall 2.0 and go back to 1.5. I experienced
>>>>>>> the same problem there. After remaking some changes to the
>>>>>>> toolbars once 2.0 was installed, uninstalling 2.0 and installing
>>>>>>> 1.5 caused those to be lost again.
>>>>>>>
>>>>>>> This is on VS.Net 2003.
>>>>>>>
>>>>>>> "Jeff" <jeffwalsh@hotmail.com> wrote in message
>>>>>>> news:dblhdo$9s9$1@is.intellij.net...
>>>>>>>> I don't have custom toolbars but I did have custom buttons
>>>>>>>> added to existing toolbars.
>>>>>>>>
>>>>>>>> They were lost after installing 201.
>>>>>>>>
>>>>>>>> Immediately after the new install, I got a error when starting
>>>>>>>> VS (2003) and had to start it again. That's when the toolbar
>>>>>>>> mods were gone.
>>>>>>>>
>>>>>>>> PS How about adding a way to save the existing toolbar
>>>>>>>> configuration so it could be restored in cases like this? This
>>>>>>>> has always been annoying.
>>>>>>>>
>>>>>>>> Thanks,
>>>>>>>>
>>>>>>>> Jeff
>>>>>>>>
>>>>>>>> "Michael Reukauff" <mreukauff@gmx.net> wrote in message
>>>>>>>> news:dbla65$vj5$1@is.intellij.net...
>>>>>>>>
>>>>>>>>> Hi
>>>>>>>>> I checked out R# 2.0 this morning and found some oddness. Most
>>>>>>>>> of
>>>>>>>>> them
>>>>>>>>> are already mentioned by others here in the newsgroup (i.e.
>>>>>>>>> slow
>>>>>>>>> startup
>>>>>>>>> of VS2003, magenta lightbulb, ...)
>>>>>>>>> I am using a lot of custom toolbars which are created by
>>>>>>>>> myself.
>>>>>>>>> But
>>>>>>>>> after the installation of R# 2.0 they are all gone! That's
>>>>>>>>> bad.
>>>>>>>>> I
>>>>>>>>> invested a couple of hours in building these toolbars, they
>>>>>>>>> are
>>>>>>>>> a
>>>>>>>>> great timesaver for my work. Do you know how I can save them
>>>>>>>>> before
>>>>>>>>> installation of R# and restore them after the installation?
>>>>>>>>> Is there a new R# 2.0 Default Keymap available as for 1.5 ?
>>>>>>>>> Thanks for R#. It is a great tool.
>>>>>>>>> Bye
>>>>>>>>> Michael


0
Comment actions Permalink

Hello Dmitry,

The procedure that I followed was:
Copy file
Install Resharper 205
Copy file
Open VS
Close VS
Copy file

It definately changed during the install procedure

Hello Ronnie,

surely, this file is saved when you close VS, and loaded when you run
it
or activate ReSharper - that's totally OK.
Are you sure that the file has been changed during installation and
not later?
I would presume it should be kept in
its place during installation, then loaded into the VS/ReSharper with
old
settings.
Regards,
Dmitry Shaporenkov
JetBrains, Inc
http://www.jetbrains.com
"Develop with pleasure!"

>> Hello Ronnie,
>>
>> Interestingly, the file changes again when VS is loaded/quit
>> (attached). I manually merged old/new and everything seems ok
>> (attached)
>>
>> Ronnie
>>
>>> Hello Dmitry,
>>>
>>> It canged (and seemed to lose the 'CodeStyleSettings' section
>>> amongst others - see attached.
>>>
>>> Ronnie
>>>
>>>> Ronnie,
>>>>
>>>> R# formatting preferences are kept in the UserSettings.xml file
>>>> located in
>>>> your user directory. This file
>>>> should not be overwritten during installation. Could you please
>>>> check
>>>> next
>>>> time you install ReSharper if
>>>> it is not really overwritten for you?
>>>> Regards,
>>>> Dmitry Shaporenkov
>>>> JetBrains, Inc
>>>> http://www.jetbrains.com
>>>> "Develop with pleasure!"
>>>>> Hello Dmitry,
>>>>>
>>>>> I have seen the workaround before - maybe I should have started a
>>>>> new thread. I have noticed that when installing a new version I
>>>>> lose my R# code formatting preferences (like # lines between
>>>>> classes etc.)
>>>>>
>>>>> Ronnie
>>>>>
>>>>>> Hello Ronnie,
>>>>>>
>>>>>> it appears the problem with custom toolbars is discussed in two
>>>>>> threads concurrently.
>>>>>> Look at the thread 'custom toolbars are gone again' started by
>>>>>> Michael
>>>>>> -
>>>>>> it seems we've
>>>>>> found a feasible workaround for this bug of VS 2003.
>>>>>> Regards,
>>>>>> Dmitry Shaporenkov
>>>>>> JetBrains, Inc
>>>>>> http://www.jetbrains.com
>>>>>> "Develop with pleasure!"
>>>>>>> Hello Paul,
>>>>>>>
>>>>>>> Is this problem limited to toolbars? All my code-formatting
>>>>>>> options are disapearing after each upgrade!
>>>>>>>
>>>>>>> Ronnie
>>>>>>>
>>>>>>>> I had the same experience.
>>>>>>>>
>>>>>>>> I since had to uninstall 2.0 and go back to 1.5. I experienced
>>>>>>>> the same problem there. After remaking some changes to the
>>>>>>>> toolbars once 2.0 was installed, uninstalling 2.0 and
>>>>>>>> installing 1.5 caused those to be lost again.
>>>>>>>>
>>>>>>>> This is on VS.Net 2003.
>>>>>>>>
>>>>>>>> "Jeff" <jeffwalsh@hotmail.com> wrote in message
>>>>>>>> news:dblhdo$9s9$1@is.intellij.net...
>>>>>>>>> I don't have custom toolbars but I did have custom buttons
>>>>>>>>> added to existing toolbars.
>>>>>>>>>
>>>>>>>>> They were lost after installing 201.
>>>>>>>>>
>>>>>>>>> Immediately after the new install, I got a error when starting
>>>>>>>>> VS (2003) and had to start it again. That's when the toolbar
>>>>>>>>> mods were gone.
>>>>>>>>>
>>>>>>>>> PS How about adding a way to save the existing toolbar
>>>>>>>>> configuration so it could be restored in cases like this? This
>>>>>>>>> has always been annoying.
>>>>>>>>>
>>>>>>>>> Thanks,
>>>>>>>>>
>>>>>>>>> Jeff
>>>>>>>>>
>>>>>>>>> "Michael Reukauff" <mreukauff@gmx.net> wrote in message
>>>>>>>>> news:dbla65$vj5$1@is.intellij.net...
>>>>>>>>>
>>>>>>>>>> Hi
>>>>>>>>>> I checked out R# 2.0 this morning and found some oddness.
>>>>>>>>>> Most
>>>>>>>>>> of
>>>>>>>>>> them
>>>>>>>>>> are already mentioned by others here in the newsgroup (i.e.
>>>>>>>>>> slow
>>>>>>>>>> startup
>>>>>>>>>> of VS2003, magenta lightbulb, ...)
>>>>>>>>>> I am using a lot of custom toolbars which are created by
>>>>>>>>>> myself.
>>>>>>>>>> But
>>>>>>>>>> after the installation of R# 2.0 they are all gone! That's
>>>>>>>>>> bad.
>>>>>>>>>> I
>>>>>>>>>> invested a couple of hours in building these toolbars, they
>>>>>>>>>> are
>>>>>>>>>> a
>>>>>>>>>> great timesaver for my work. Do you know how I can save them
>>>>>>>>>> before
>>>>>>>>>> installation of R# and restore them after the installation?
>>>>>>>>>> Is there a new R# 2.0 Default Keymap available as for 1.5 ?
>>>>>>>>>> Thanks for R#. It is a great tool.
>>>>>>>>>> Bye
>>>>>>>>>> Michael


0
Comment actions Permalink

Back to this - after installing 207 I notice that settings are still getting
lost - so far I have noticed that the Read / Write Usage colours are lost!

Hello Dmitry,

The procedure that I followed was:
Copy file
Install Resharper 205
Copy file
Open VS
Close VS
Copy file
It definately changed during the install procedure

>> Hello Ronnie,
>>
>> surely, this file is saved when you close VS, and loaded when you run
>> it
>> or activate ReSharper - that's totally OK.
>> Are you sure that the file has been changed during installation and
>> not later?
>> I would presume it should be kept in
>> its place during installation, then loaded into the VS/ReSharper with
>> old
>> settings.
>> Regards,
>> Dmitry Shaporenkov
>> JetBrains, Inc
>> http://www.jetbrains.com
>> "Develop with pleasure!"
>>> Hello Ronnie,
>>>
>>> Interestingly, the file changes again when VS is loaded/quit
>>> (attached). I manually merged old/new and everything seems ok
>>> (attached)
>>>
>>> Ronnie
>>>
>>>> Hello Dmitry,
>>>>
>>>> It canged (and seemed to lose the 'CodeStyleSettings' section
>>>> amongst others - see attached.
>>>>
>>>> Ronnie
>>>>
>>>>> Ronnie,
>>>>>
>>>>> R# formatting preferences are kept in the UserSettings.xml file
>>>>> located in
>>>>> your user directory. This file
>>>>> should not be overwritten during installation. Could you please
>>>>> check
>>>>> next
>>>>> time you install ReSharper if
>>>>> it is not really overwritten for you?
>>>>> Regards,
>>>>> Dmitry Shaporenkov
>>>>> JetBrains, Inc
>>>>> http://www.jetbrains.com
>>>>> "Develop with pleasure!"
>>>>>> Hello Dmitry,
>>>>>>
>>>>>> I have seen the workaround before - maybe I should have started a
>>>>>> new thread. I have noticed that when installing a new version I
>>>>>> lose my R# code formatting preferences (like # lines between
>>>>>> classes etc.)
>>>>>>
>>>>>> Ronnie
>>>>>>
>>>>>>> Hello Ronnie,
>>>>>>>
>>>>>>> it appears the problem with custom toolbars is discussed in two
>>>>>>> threads concurrently.
>>>>>>> Look at the thread 'custom toolbars are gone again' started by
>>>>>>> Michael
>>>>>>> -
>>>>>>> it seems we've
>>>>>>> found a feasible workaround for this bug of VS 2003.
>>>>>>> Regards,
>>>>>>> Dmitry Shaporenkov
>>>>>>> JetBrains, Inc
>>>>>>> http://www.jetbrains.com
>>>>>>> "Develop with pleasure!"
>>>>>>>> Hello Paul,
>>>>>>>>
>>>>>>>> Is this problem limited to toolbars? All my code-formatting
>>>>>>>> options are disapearing after each upgrade!
>>>>>>>>
>>>>>>>> Ronnie
>>>>>>>>
>>>>>>>>> I had the same experience.
>>>>>>>>>
>>>>>>>>> I since had to uninstall 2.0 and go back to 1.5. I
>>>>>>>>> experienced the same problem there. After remaking some
>>>>>>>>> changes to the toolbars once 2.0 was installed, uninstalling
>>>>>>>>> 2.0 and installing 1.5 caused those to be lost again.
>>>>>>>>>
>>>>>>>>> This is on VS.Net 2003.
>>>>>>>>>
>>>>>>>>> "Jeff" <jeffwalsh@hotmail.com> wrote in message
>>>>>>>>> news:dblhdo$9s9$1@is.intellij.net...
>>>>>>>>>> I don't have custom toolbars but I did have custom buttons
>>>>>>>>>> added to existing toolbars.
>>>>>>>>>>
>>>>>>>>>> They were lost after installing 201.
>>>>>>>>>>
>>>>>>>>>> Immediately after the new install, I got a error when
>>>>>>>>>> starting VS (2003) and had to start it again. That's when the
>>>>>>>>>> toolbar mods were gone.
>>>>>>>>>>
>>>>>>>>>> PS How about adding a way to save the existing toolbar
>>>>>>>>>> configuration so it could be restored in cases like this?
>>>>>>>>>> This has always been annoying.
>>>>>>>>>>
>>>>>>>>>> Thanks,
>>>>>>>>>>
>>>>>>>>>> Jeff
>>>>>>>>>>
>>>>>>>>>> "Michael Reukauff" <mreukauff@gmx.net> wrote in message
>>>>>>>>>> news:dbla65$vj5$1@is.intellij.net...
>>>>>>>>>>
>>>>>>>>>>> Hi
>>>>>>>>>>> I checked out R# 2.0 this morning and found some oddness.
>>>>>>>>>>> Most
>>>>>>>>>>> of
>>>>>>>>>>> them
>>>>>>>>>>> are already mentioned by others here in the newsgroup (i.e.
>>>>>>>>>>> slow
>>>>>>>>>>> startup
>>>>>>>>>>> of VS2003, magenta lightbulb, ...)
>>>>>>>>>>> I am using a lot of custom toolbars which are created by
>>>>>>>>>>> myself.
>>>>>>>>>>> But
>>>>>>>>>>> after the installation of R# 2.0 they are all gone! That's
>>>>>>>>>>> bad.
>>>>>>>>>>> I
>>>>>>>>>>> invested a couple of hours in building these toolbars, they
>>>>>>>>>>> are
>>>>>>>>>>> a
>>>>>>>>>>> great timesaver for my work. Do you know how I can save them
>>>>>>>>>>> before
>>>>>>>>>>> installation of R# and restore them after the installation?
>>>>>>>>>>> Is there a new R# 2.0 Default Keymap available as for 1.5 ?
>>>>>>>>>>> Thanks for R#. It is a great tool.
>>>>>>>>>>> Bye
>>>>>>>>>>> Michael


0
Comment actions Permalink

Hello Ronnie,

do you mean you've lost your custom colors for Read/Write Usage display items?
They
are not kept in the UserSettings.xml file, but are stored in the registry.

Regards,
Dmitry Shaporenkov
JetBrains, Inc
http://www.jetbrains.com
"Develop with pleasure!"

Back to this - after installing 207 I notice that settings are still
getting lost - so far I have noticed that the Read / Write Usage
colours are lost!

>> Hello Dmitry,
>>
>> The procedure that I followed was:
>> Copy file
>> Install Resharper 205
>> Copy file
>> Open VS
>> Close VS
>> Copy file
>> It definately changed during the install procedure
>>> Hello Ronnie,
>>>
>>> surely, this file is saved when you close VS, and loaded when you
>>> run
>>> it
>>> or activate ReSharper - that's totally OK.
>>> Are you sure that the file has been changed during installation and
>>> not later?
>>> I would presume it should be kept in
>>> its place during installation, then loaded into the VS/ReSharper
>>> with
>>> old
>>> settings.
>>> Regards,
>>> Dmitry Shaporenkov
>>> JetBrains, Inc
>>> http://www.jetbrains.com
>>> "Develop with pleasure!"
>>>> Hello Ronnie,
>>>>
>>>> Interestingly, the file changes again when VS is loaded/quit
>>>> (attached). I manually merged old/new and everything seems ok
>>>> (attached)
>>>>
>>>> Ronnie
>>>>
>>>>> Hello Dmitry,
>>>>>
>>>>> It canged (and seemed to lose the 'CodeStyleSettings' section
>>>>> amongst others - see attached.
>>>>>
>>>>> Ronnie
>>>>>
>>>>>> Ronnie,
>>>>>>
>>>>>> R# formatting preferences are kept in the UserSettings.xml file
>>>>>> located in
>>>>>> your user directory. This file
>>>>>> should not be overwritten during installation. Could you please
>>>>>> check
>>>>>> next
>>>>>> time you install ReSharper if
>>>>>> it is not really overwritten for you?
>>>>>> Regards,
>>>>>> Dmitry Shaporenkov
>>>>>> JetBrains, Inc
>>>>>> http://www.jetbrains.com
>>>>>> "Develop with pleasure!"
>>>>>>> Hello Dmitry,
>>>>>>>
>>>>>>> I have seen the workaround before - maybe I should have started
>>>>>>> a new thread. I have noticed that when installing a new version
>>>>>>> I lose my R# code formatting preferences (like # lines between
>>>>>>> classes etc.)
>>>>>>>
>>>>>>> Ronnie
>>>>>>>
>>>>>>>> Hello Ronnie,
>>>>>>>>
>>>>>>>> it appears the problem with custom toolbars is discussed in two
>>>>>>>> threads concurrently.
>>>>>>>> Look at the thread 'custom toolbars are gone again' started by
>>>>>>>> Michael
>>>>>>>> -
>>>>>>>> it seems we've
>>>>>>>> found a feasible workaround for this bug of VS 2003.
>>>>>>>> Regards,
>>>>>>>> Dmitry Shaporenkov
>>>>>>>> JetBrains, Inc
>>>>>>>> http://www.jetbrains.com
>>>>>>>> "Develop with pleasure!"
>>>>>>>>> Hello Paul,
>>>>>>>>>
>>>>>>>>> Is this problem limited to toolbars? All my code-formatting
>>>>>>>>> options are disapearing after each upgrade!
>>>>>>>>>
>>>>>>>>> Ronnie
>>>>>>>>>
>>>>>>>>>> I had the same experience.
>>>>>>>>>>
>>>>>>>>>> I since had to uninstall 2.0 and go back to 1.5. I
>>>>>>>>>> experienced the same problem there. After remaking some
>>>>>>>>>> changes to the toolbars once 2.0 was installed, uninstalling
>>>>>>>>>> 2.0 and installing 1.5 caused those to be lost again.
>>>>>>>>>>
>>>>>>>>>> This is on VS.Net 2003.
>>>>>>>>>>
>>>>>>>>>> "Jeff" <jeffwalsh@hotmail.com> wrote in message
>>>>>>>>>> news:dblhdo$9s9$1@is.intellij.net...
>>>>>>>>>>> I don't have custom toolbars but I did have custom buttons
>>>>>>>>>>> added to existing toolbars.
>>>>>>>>>>>
>>>>>>>>>>> They were lost after installing 201.
>>>>>>>>>>>
>>>>>>>>>>> Immediately after the new install, I got a error when
>>>>>>>>>>> starting VS (2003) and had to start it again. That's when
>>>>>>>>>>> the toolbar mods were gone.
>>>>>>>>>>>
>>>>>>>>>>> PS How about adding a way to save the existing toolbar
>>>>>>>>>>> configuration so it could be restored in cases like this?
>>>>>>>>>>> This has always been annoying.
>>>>>>>>>>>
>>>>>>>>>>> Thanks,
>>>>>>>>>>>
>>>>>>>>>>> Jeff
>>>>>>>>>>>
>>>>>>>>>>> "Michael Reukauff" <mreukauff@gmx.net> wrote in message
>>>>>>>>>>> news:dbla65$vj5$1@is.intellij.net...
>>>>>>>>>>>
>>>>>>>>>>>> Hi
>>>>>>>>>>>> I checked out R# 2.0 this morning and found some oddness.
>>>>>>>>>>>> Most
>>>>>>>>>>>> of
>>>>>>>>>>>> them
>>>>>>>>>>>> are already mentioned by others here in the newsgroup (i.e.
>>>>>>>>>>>> slow
>>>>>>>>>>>> startup
>>>>>>>>>>>> of VS2003, magenta lightbulb, ...)
>>>>>>>>>>>> I am using a lot of custom toolbars which are created by
>>>>>>>>>>>> myself.
>>>>>>>>>>>> But
>>>>>>>>>>>> after the installation of R# 2.0 they are all gone! That's
>>>>>>>>>>>> bad.
>>>>>>>>>>>> I
>>>>>>>>>>>> invested a couple of hours in building these toolbars, they
>>>>>>>>>>>> are
>>>>>>>>>>>> a
>>>>>>>>>>>> great timesaver for my work. Do you know how I can save
>>>>>>>>>>>> them
>>>>>>>>>>>> before
>>>>>>>>>>>> installation of R# and restore them after the installation?
>>>>>>>>>>>> Is there a new R# 2.0 Default Keymap available as for 1.5 ?
>>>>>>>>>>>> Thanks for R#. It is a great tool.
>>>>>>>>>>>> Bye
>>>>>>>>>>>> Michael


0
Comment actions Permalink

Hello Dmitry,

As I sent the post I realised that they are probably in the registry - I
remember having an issue with colours in the past!

Anyway, YES I mean that I have been losing the custom colours for Read /
Write Usage - I think every new v2 build so far!

Ronnie
VS2003, R#207

Hello Ronnie,

do you mean you've lost your custom colors for Read/Write Usage
display items?
They
are not kept in the UserSettings.xml file, but are stored in the
registry.
Regards,
Dmitry Shaporenkov
JetBrains, Inc
http://www.jetbrains.com
"Develop with pleasure!"

>> Back to this - after installing 207 I notice that settings are still
>> getting lost - so far I have noticed that the Read / Write Usage
>> colours are lost!
>>
>>> Hello Dmitry,
>>>
>>> The procedure that I followed was:
>>> Copy file
>>> Install Resharper 205
>>> Copy file
>>> Open VS
>>> Close VS
>>> Copy file
>>> It definately changed during the install procedure
>>>> Hello Ronnie,
>>>>
>>>> surely, this file is saved when you close VS, and loaded when you
>>>> run
>>>> it
>>>> or activate ReSharper - that's totally OK.
>>>> Are you sure that the file has been changed during installation and
>>>> not later?
>>>> I would presume it should be kept in
>>>> its place during installation, then loaded into the VS/ReSharper
>>>> with
>>>> old
>>>> settings.
>>>> Regards,
>>>> Dmitry Shaporenkov
>>>> JetBrains, Inc
>>>> http://www.jetbrains.com
>>>> "Develop with pleasure!"
>>>>> Hello Ronnie,
>>>>>
>>>>> Interestingly, the file changes again when VS is loaded/quit
>>>>> (attached). I manually merged old/new and everything seems ok
>>>>> (attached)
>>>>>
>>>>> Ronnie
>>>>>
>>>>>> Hello Dmitry,
>>>>>>
>>>>>> It canged (and seemed to lose the 'CodeStyleSettings' section
>>>>>> amongst others - see attached.
>>>>>>
>>>>>> Ronnie
>>>>>>
>>>>>>> Ronnie,
>>>>>>>
>>>>>>> R# formatting preferences are kept in the UserSettings.xml file
>>>>>>> located in
>>>>>>> your user directory. This file
>>>>>>> should not be overwritten during installation. Could you please
>>>>>>> check
>>>>>>> next
>>>>>>> time you install ReSharper if
>>>>>>> it is not really overwritten for you?
>>>>>>> Regards,
>>>>>>> Dmitry Shaporenkov
>>>>>>> JetBrains, Inc
>>>>>>> http://www.jetbrains.com
>>>>>>> "Develop with pleasure!"
>>>>>>>> Hello Dmitry,
>>>>>>>>
>>>>>>>> I have seen the workaround before - maybe I should have started
>>>>>>>> a new thread. I have noticed that when installing a new version
>>>>>>>> I lose my R# code formatting preferences (like # lines between
>>>>>>>> classes etc.)
>>>>>>>>
>>>>>>>> Ronnie
>>>>>>>>
>>>>>>>>> Hello Ronnie,
>>>>>>>>>
>>>>>>>>> it appears the problem with custom toolbars is discussed in
>>>>>>>>> two
>>>>>>>>> threads concurrently.
>>>>>>>>> Look at the thread 'custom toolbars are gone again' started by
>>>>>>>>> Michael
>>>>>>>>> -
>>>>>>>>> it seems we've
>>>>>>>>> found a feasible workaround for this bug of VS 2003.
>>>>>>>>> Regards,
>>>>>>>>> Dmitry Shaporenkov
>>>>>>>>> JetBrains, Inc
>>>>>>>>> http://www.jetbrains.com
>>>>>>>>> "Develop with pleasure!"
>>>>>>>>>> Hello Paul,
>>>>>>>>>>
>>>>>>>>>> Is this problem limited to toolbars? All my code-formatting
>>>>>>>>>> options are disapearing after each upgrade!
>>>>>>>>>>
>>>>>>>>>> Ronnie
>>>>>>>>>>
>>>>>>>>>>> I had the same experience.
>>>>>>>>>>>
>>>>>>>>>>> I since had to uninstall 2.0 and go back to 1.5. I
>>>>>>>>>>> experienced the same problem there. After remaking some
>>>>>>>>>>> changes to the toolbars once 2.0 was installed, uninstalling
>>>>>>>>>>> 2.0 and installing 1.5 caused those to be lost again.
>>>>>>>>>>>
>>>>>>>>>>> This is on VS.Net 2003.
>>>>>>>>>>>
>>>>>>>>>>> "Jeff" <jeffwalsh@hotmail.com> wrote in message
>>>>>>>>>>> news:dblhdo$9s9$1@is.intellij.net...
>>>>>>>>>>>> I don't have custom toolbars but I did have custom buttons
>>>>>>>>>>>> added to existing toolbars.
>>>>>>>>>>>>
>>>>>>>>>>>> They were lost after installing 201.
>>>>>>>>>>>>
>>>>>>>>>>>> Immediately after the new install, I got a error when
>>>>>>>>>>>> starting VS (2003) and had to start it again. That's when
>>>>>>>>>>>> the toolbar mods were gone.
>>>>>>>>>>>>
>>>>>>>>>>>> PS How about adding a way to save the existing toolbar
>>>>>>>>>>>> configuration so it could be restored in cases like this?
>>>>>>>>>>>> This has always been annoying.
>>>>>>>>>>>>
>>>>>>>>>>>> Thanks,
>>>>>>>>>>>>
>>>>>>>>>>>> Jeff
>>>>>>>>>>>>
>>>>>>>>>>>> "Michael Reukauff" <mreukauff@gmx.net> wrote in message
>>>>>>>>>>>> news:dbla65$vj5$1@is.intellij.net...
>>>>>>>>>>>>
>>>>>>>>>>>>> Hi
>>>>>>>>>>>>> I checked out R# 2.0 this morning and found some oddness.
>>>>>>>>>>>>> Most
>>>>>>>>>>>>> of
>>>>>>>>>>>>> them
>>>>>>>>>>>>> are already mentioned by others here in the newsgroup
>>>>>>>>>>>>> (i.e.
>>>>>>>>>>>>> slow
>>>>>>>>>>>>> startup
>>>>>>>>>>>>> of VS2003, magenta lightbulb, ...)
>>>>>>>>>>>>> I am using a lot of custom toolbars which are created by
>>>>>>>>>>>>> myself.
>>>>>>>>>>>>> But
>>>>>>>>>>>>> after the installation of R# 2.0 they are all gone! That's
>>>>>>>>>>>>> bad.
>>>>>>>>>>>>> I
>>>>>>>>>>>>> invested a couple of hours in building these toolbars,
>>>>>>>>>>>>> they
>>>>>>>>>>>>> are
>>>>>>>>>>>>> a
>>>>>>>>>>>>> great timesaver for my work. Do you know how I can save
>>>>>>>>>>>>> them
>>>>>>>>>>>>> before
>>>>>>>>>>>>> installation of R# and restore them after the
>>>>>>>>>>>>> installation?
>>>>>>>>>>>>> Is there a new R# 2.0 Default Keymap available as for 1.5
>>>>>>>>>>>>> ?
>>>>>>>>>>>>> Thanks for R#. It is a great tool.
>>>>>>>>>>>>> Bye
>>>>>>>>>>>>> Michael


0
Comment actions Permalink

Hello Ronnie,

during installation ReSharper installs custom colors for some of its display
items
into registry. Of course, it should not overwrite user's custom colors if
there are any.
I'll check if it really works as it should.

Regards,
Dmitry Shaporenkov
JetBrains, Inc
http://www.jetbrains.com
"Develop with pleasure!"

Hello Dmitry,

As I sent the post I realised that they are probably in the registry -
I remember having an issue with colours in the past!

Anyway, YES I mean that I have been losing the custom colours for Read
/ Write Usage - I think every new v2 build so far!

Ronnie
VS2003, R#207

>> Hello Ronnie,
>>
>> do you mean you've lost your custom colors for Read/Write Usage
>> display items?
>> They
>> are not kept in the UserSettings.xml file, but are stored in the
>> registry.
>> Regards,
>> Dmitry Shaporenkov
>> JetBrains, Inc
>> http://www.jetbrains.com
>> "Develop with pleasure!"
>>> Back to this - after installing 207 I notice that settings are still
>>> getting lost - so far I have noticed that the Read / Write Usage
>>> colours are lost!
>>>
>>>> Hello Dmitry,
>>>>
>>>> The procedure that I followed was:
>>>> Copy file
>>>> Install Resharper 205
>>>> Copy file
>>>> Open VS
>>>> Close VS
>>>> Copy file
>>>> It definately changed during the install procedure
>>>>> Hello Ronnie,
>>>>>
>>>>> surely, this file is saved when you close VS, and loaded when you
>>>>> run
>>>>> it
>>>>> or activate ReSharper - that's totally OK.
>>>>> Are you sure that the file has been changed during installation
>>>>> and
>>>>> not later?
>>>>> I would presume it should be kept in
>>>>> its place during installation, then loaded into the VS/ReSharper
>>>>> with
>>>>> old
>>>>> settings.
>>>>> Regards,
>>>>> Dmitry Shaporenkov
>>>>> JetBrains, Inc
>>>>> http://www.jetbrains.com
>>>>> "Develop with pleasure!"
>>>>>> Hello Ronnie,
>>>>>>
>>>>>> Interestingly, the file changes again when VS is loaded/quit
>>>>>> (attached). I manually merged old/new and everything seems ok
>>>>>> (attached)
>>>>>>
>>>>>> Ronnie
>>>>>>
>>>>>>> Hello Dmitry,
>>>>>>>
>>>>>>> It canged (and seemed to lose the 'CodeStyleSettings' section
>>>>>>> amongst others - see attached.
>>>>>>>
>>>>>>> Ronnie
>>>>>>>
>>>>>>>> Ronnie,
>>>>>>>>
>>>>>>>> R# formatting preferences are kept in the UserSettings.xml file
>>>>>>>> located in
>>>>>>>> your user directory. This file
>>>>>>>> should not be overwritten during installation. Could you please
>>>>>>>> check
>>>>>>>> next
>>>>>>>> time you install ReSharper if
>>>>>>>> it is not really overwritten for you?
>>>>>>>> Regards,
>>>>>>>> Dmitry Shaporenkov
>>>>>>>> JetBrains, Inc
>>>>>>>> http://www.jetbrains.com
>>>>>>>> "Develop with pleasure!"
>>>>>>>>> Hello Dmitry,
>>>>>>>>>
>>>>>>>>> I have seen the workaround before - maybe I should have
>>>>>>>>> started a new thread. I have noticed that when installing a
>>>>>>>>> new version I lose my R# code formatting preferences (like #
>>>>>>>>> lines between classes etc.)
>>>>>>>>>
>>>>>>>>> Ronnie
>>>>>>>>>
>>>>>>>>>> Hello Ronnie,
>>>>>>>>>>
>>>>>>>>>> it appears the problem with custom toolbars is discussed in
>>>>>>>>>> two
>>>>>>>>>> threads concurrently.
>>>>>>>>>> Look at the thread 'custom toolbars are gone again' started
>>>>>>>>>> by
>>>>>>>>>> Michael
>>>>>>>>>> -
>>>>>>>>>> it seems we've
>>>>>>>>>> found a feasible workaround for this bug of VS 2003.
>>>>>>>>>> Regards,
>>>>>>>>>> Dmitry Shaporenkov
>>>>>>>>>> JetBrains, Inc
>>>>>>>>>> http://www.jetbrains.com
>>>>>>>>>> "Develop with pleasure!"
>>>>>>>>>>> Hello Paul,
>>>>>>>>>>>
>>>>>>>>>>> Is this problem limited to toolbars? All my code-formatting
>>>>>>>>>>> options are disapearing after each upgrade!
>>>>>>>>>>>
>>>>>>>>>>> Ronnie
>>>>>>>>>>>
>>>>>>>>>>>> I had the same experience.
>>>>>>>>>>>>
>>>>>>>>>>>> I since had to uninstall 2.0 and go back to 1.5. I
>>>>>>>>>>>> experienced the same problem there. After remaking some
>>>>>>>>>>>> changes to the toolbars once 2.0 was installed,
>>>>>>>>>>>> uninstalling 2.0 and installing 1.5 caused those to be lost
>>>>>>>>>>>> again.
>>>>>>>>>>>>
>>>>>>>>>>>> This is on VS.Net 2003.
>>>>>>>>>>>>
>>>>>>>>>>>> "Jeff" <jeffwalsh@hotmail.com> wrote in message
>>>>>>>>>>>> news:dblhdo$9s9$1@is.intellij.net...
>>>>>>>>>>>>> I don't have custom toolbars but I did have custom buttons
>>>>>>>>>>>>> added to existing toolbars.
>>>>>>>>>>>>>
>>>>>>>>>>>>> They were lost after installing 201.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Immediately after the new install, I got a error when
>>>>>>>>>>>>> starting VS (2003) and had to start it again. That's when
>>>>>>>>>>>>> the toolbar mods were gone.
>>>>>>>>>>>>>
>>>>>>>>>>>>> PS How about adding a way to save the existing toolbar
>>>>>>>>>>>>> configuration so it could be restored in cases like this?
>>>>>>>>>>>>> This has always been annoying.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Thanks,
>>>>>>>>>>>>>
>>>>>>>>>>>>> Jeff
>>>>>>>>>>>>>
>>>>>>>>>>>>> "Michael Reukauff" <mreukauff@gmx.net> wrote in message
>>>>>>>>>>>>> news:dbla65$vj5$1@is.intellij.net...
>>>>>>>>>>>>>
>>>>>>>>>>>>>> Hi
>>>>>>>>>>>>>> I checked out R# 2.0 this morning and found some oddness.
>>>>>>>>>>>>>> Most
>>>>>>>>>>>>>> of
>>>>>>>>>>>>>> them
>>>>>>>>>>>>>> are already mentioned by others here in the newsgroup
>>>>>>>>>>>>>> (i.e.
>>>>>>>>>>>>>> slow
>>>>>>>>>>>>>> startup
>>>>>>>>>>>>>> of VS2003, magenta lightbulb, ...)
>>>>>>>>>>>>>> I am using a lot of custom toolbars which are created by
>>>>>>>>>>>>>> myself.
>>>>>>>>>>>>>> But
>>>>>>>>>>>>>> after the installation of R# 2.0 they are all gone!
>>>>>>>>>>>>>> That's
>>>>>>>>>>>>>> bad.
>>>>>>>>>>>>>> I
>>>>>>>>>>>>>> invested a couple of hours in building these toolbars,
>>>>>>>>>>>>>> they
>>>>>>>>>>>>>> are
>>>>>>>>>>>>>> a
>>>>>>>>>>>>>> great timesaver for my work. Do you know how I can save
>>>>>>>>>>>>>> them
>>>>>>>>>>>>>> before
>>>>>>>>>>>>>> installation of R# and restore them after the
>>>>>>>>>>>>>> installation?
>>>>>>>>>>>>>> Is there a new R# 2.0 Default Keymap available as for 1.5
>>>>>>>>>>>>>> ?
>>>>>>>>>>>>>> Thanks for R#. It is a great tool.
>>>>>>>>>>>>>> Bye
>>>>>>>>>>>>>> Michael


0
Comment actions Permalink

Hello Dmitry,

Thanks - I will look more carefully when 208 comes out too!

Ronnie

Hello Ronnie,

during installation ReSharper installs custom colors for some of its
display
items
into registry. Of course, it should not overwrite user's custom colors
if
there are any.
I'll check if it really works as it should.
Regards,
Dmitry Shaporenkov
JetBrains, Inc
http://www.jetbrains.com
"Develop with pleasure!"

>> Hello Dmitry,
>>
>> As I sent the post I realised that they are probably in the registry
>> - I remember having an issue with colours in the past!
>>
>> Anyway, YES I mean that I have been losing the custom colours for
>> Read / Write Usage - I think every new v2 build so far!
>>
>> Ronnie
>> VS2003, R#207
>>> Hello Ronnie,
>>>
>>> do you mean you've lost your custom colors for Read/Write Usage
>>> display items?
>>> They
>>> are not kept in the UserSettings.xml file, but are stored in the
>>> registry.
>>> Regards,
>>> Dmitry Shaporenkov
>>> JetBrains, Inc
>>> http://www.jetbrains.com
>>> "Develop with pleasure!"
>>>> Back to this - after installing 207 I notice that settings are
>>>> still getting lost - so far I have noticed that the Read / Write
>>>> Usage colours are lost!
>>>>
>>>>> Hello Dmitry,
>>>>>
>>>>> The procedure that I followed was:
>>>>> Copy file
>>>>> Install Resharper 205
>>>>> Copy file
>>>>> Open VS
>>>>> Close VS
>>>>> Copy file
>>>>> It definately changed during the install procedure
>>>>>> Hello Ronnie,
>>>>>>
>>>>>> surely, this file is saved when you close VS, and loaded when you
>>>>>> run
>>>>>> it
>>>>>> or activate ReSharper - that's totally OK.
>>>>>> Are you sure that the file has been changed during installation
>>>>>> and
>>>>>> not later?
>>>>>> I would presume it should be kept in
>>>>>> its place during installation, then loaded into the VS/ReSharper
>>>>>> with
>>>>>> old
>>>>>> settings.
>>>>>> Regards,
>>>>>> Dmitry Shaporenkov
>>>>>> JetBrains, Inc
>>>>>> http://www.jetbrains.com
>>>>>> "Develop with pleasure!"
>>>>>>> Hello Ronnie,
>>>>>>>
>>>>>>> Interestingly, the file changes again when VS is loaded/quit
>>>>>>> (attached). I manually merged old/new and everything seems ok
>>>>>>> (attached)
>>>>>>>
>>>>>>> Ronnie
>>>>>>>
>>>>>>>> Hello Dmitry,
>>>>>>>>
>>>>>>>> It canged (and seemed to lose the 'CodeStyleSettings' section
>>>>>>>> amongst others - see attached.
>>>>>>>>
>>>>>>>> Ronnie
>>>>>>>>
>>>>>>>>> Ronnie,
>>>>>>>>>
>>>>>>>>> R# formatting preferences are kept in the UserSettings.xml
>>>>>>>>> file
>>>>>>>>> located in
>>>>>>>>> your user directory. This file
>>>>>>>>> should not be overwritten during installation. Could you
>>>>>>>>> please
>>>>>>>>> check
>>>>>>>>> next
>>>>>>>>> time you install ReSharper if
>>>>>>>>> it is not really overwritten for you?
>>>>>>>>> Regards,
>>>>>>>>> Dmitry Shaporenkov
>>>>>>>>> JetBrains, Inc
>>>>>>>>> http://www.jetbrains.com
>>>>>>>>> "Develop with pleasure!"
>>>>>>>>>> Hello Dmitry,
>>>>>>>>>>
>>>>>>>>>> I have seen the workaround before - maybe I should have
>>>>>>>>>> started a new thread. I have noticed that when installing a
>>>>>>>>>> new version I lose my R# code formatting preferences (like #
>>>>>>>>>> lines between classes etc.)
>>>>>>>>>>
>>>>>>>>>> Ronnie
>>>>>>>>>>
>>>>>>>>>>> Hello Ronnie,
>>>>>>>>>>>
>>>>>>>>>>> it appears the problem with custom toolbars is discussed in
>>>>>>>>>>> two
>>>>>>>>>>> threads concurrently.
>>>>>>>>>>> Look at the thread 'custom toolbars are gone again' started
>>>>>>>>>>> by
>>>>>>>>>>> Michael
>>>>>>>>>>> -
>>>>>>>>>>> it seems we've
>>>>>>>>>>> found a feasible workaround for this bug of VS 2003.
>>>>>>>>>>> Regards,
>>>>>>>>>>> Dmitry Shaporenkov
>>>>>>>>>>> JetBrains, Inc
>>>>>>>>>>> http://www.jetbrains.com
>>>>>>>>>>> "Develop with pleasure!"
>>>>>>>>>>>> Hello Paul,
>>>>>>>>>>>>
>>>>>>>>>>>> Is this problem limited to toolbars? All my code-formatting
>>>>>>>>>>>> options are disapearing after each upgrade!
>>>>>>>>>>>>
>>>>>>>>>>>> Ronnie
>>>>>>>>>>>>
>>>>>>>>>>>>> I had the same experience.
>>>>>>>>>>>>>
>>>>>>>>>>>>> I since had to uninstall 2.0 and go back to 1.5. I
>>>>>>>>>>>>> experienced the same problem there. After remaking some
>>>>>>>>>>>>> changes to the toolbars once 2.0 was installed,
>>>>>>>>>>>>> uninstalling 2.0 and installing 1.5 caused those to be
>>>>>>>>>>>>> lost again.
>>>>>>>>>>>>>
>>>>>>>>>>>>> This is on VS.Net 2003.
>>>>>>>>>>>>>
>>>>>>>>>>>>> "Jeff" <jeffwalsh@hotmail.com> wrote in message
>>>>>>>>>>>>> news:dblhdo$9s9$1@is.intellij.net...
>>>>>>>>>>>>>> I don't have custom toolbars but I did have custom
>>>>>>>>>>>>>> buttons added to existing toolbars.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> They were lost after installing 201.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Immediately after the new install, I got a error when
>>>>>>>>>>>>>> starting VS (2003) and had to start it again. That's when
>>>>>>>>>>>>>> the toolbar mods were gone.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> PS How about adding a way to save the existing toolbar
>>>>>>>>>>>>>> configuration so it could be restored in cases like this?
>>>>>>>>>>>>>> This has always been annoying.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Thanks,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Jeff
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> "Michael Reukauff" <mreukauff@gmx.net> wrote in message
>>>>>>>>>>>>>> news:dbla65$vj5$1@is.intellij.net...
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Hi
>>>>>>>>>>>>>>> I checked out R# 2.0 this morning and found some
>>>>>>>>>>>>>>> oddness.
>>>>>>>>>>>>>>> Most
>>>>>>>>>>>>>>> of
>>>>>>>>>>>>>>> them
>>>>>>>>>>>>>>> are already mentioned by others here in the newsgroup
>>>>>>>>>>>>>>> (i.e.
>>>>>>>>>>>>>>> slow
>>>>>>>>>>>>>>> startup
>>>>>>>>>>>>>>> of VS2003, magenta lightbulb, ...)
>>>>>>>>>>>>>>> I am using a lot of custom toolbars which are created by
>>>>>>>>>>>>>>> myself.
>>>>>>>>>>>>>>> But
>>>>>>>>>>>>>>> after the installation of R# 2.0 they are all gone!
>>>>>>>>>>>>>>> That's
>>>>>>>>>>>>>>> bad.
>>>>>>>>>>>>>>> I
>>>>>>>>>>>>>>> invested a couple of hours in building these toolbars,
>>>>>>>>>>>>>>> they
>>>>>>>>>>>>>>> are
>>>>>>>>>>>>>>> a
>>>>>>>>>>>>>>> great timesaver for my work. Do you know how I can save
>>>>>>>>>>>>>>> them
>>>>>>>>>>>>>>> before
>>>>>>>>>>>>>>> installation of R# and restore them after the
>>>>>>>>>>>>>>> installation?
>>>>>>>>>>>>>>> Is there a new R# 2.0 Default Keymap available as for
>>>>>>>>>>>>>>> 1.5
>>>>>>>>>>>>>>> ?
>>>>>>>>>>>>>>> Thanks for R#. It is a great tool.
>>>>>>>>>>>>>>> Bye
>>>>>>>>>>>>>>> Michael


0
Comment actions Permalink

OK, it looks like it really was a bug - the existence of custom colors was
not checked and they
simply were overwritten. Fixed now.

Regards,
Dmitry Shaporenkov
JetBrains, Inc
http://www.jetbrains.com
"Develop with pleasure!"

Hello Dmitry,

Thanks - I will look more carefully when 208 comes out too!

Ronnie

>> Hello Ronnie,
>>
>> during installation ReSharper installs custom colors for some of its
>> display
>> items
>> into registry. Of course, it should not overwrite user's custom
>> colors
>> if
>> there are any.
>> I'll check if it really works as it should.
>> Regards,
>> Dmitry Shaporenkov
>> JetBrains, Inc
>> http://www.jetbrains.com
>> "Develop with pleasure!"
>>> Hello Dmitry,
>>>
>>> As I sent the post I realised that they are probably in the registry
>>> - I remember having an issue with colours in the past!
>>>
>>> Anyway, YES I mean that I have been losing the custom colours for
>>> Read / Write Usage - I think every new v2 build so far!
>>>
>>> Ronnie
>>> VS2003, R#207
>>>> Hello Ronnie,
>>>>
>>>> do you mean you've lost your custom colors for Read/Write Usage
>>>> display items?
>>>> They
>>>> are not kept in the UserSettings.xml file, but are stored in the
>>>> registry.
>>>> Regards,
>>>> Dmitry Shaporenkov
>>>> JetBrains, Inc
>>>> http://www.jetbrains.com
>>>> "Develop with pleasure!"
>>>>> Back to this - after installing 207 I notice that settings are
>>>>> still getting lost - so far I have noticed that the Read / Write
>>>>> Usage colours are lost!
>>>>>
>>>>>> Hello Dmitry,
>>>>>>
>>>>>> The procedure that I followed was:
>>>>>> Copy file
>>>>>> Install Resharper 205
>>>>>> Copy file
>>>>>> Open VS
>>>>>> Close VS
>>>>>> Copy file
>>>>>> It definately changed during the install procedure
>>>>>>> Hello Ronnie,
>>>>>>>
>>>>>>> surely, this file is saved when you close VS, and loaded when
>>>>>>> you
>>>>>>> run
>>>>>>> it
>>>>>>> or activate ReSharper - that's totally OK.
>>>>>>> Are you sure that the file has been changed during installation
>>>>>>> and
>>>>>>> not later?
>>>>>>> I would presume it should be kept in
>>>>>>> its place during installation, then loaded into the VS/ReSharper
>>>>>>> with
>>>>>>> old
>>>>>>> settings.
>>>>>>> Regards,
>>>>>>> Dmitry Shaporenkov
>>>>>>> JetBrains, Inc
>>>>>>> http://www.jetbrains.com
>>>>>>> "Develop with pleasure!"
>>>>>>>> Hello Ronnie,
>>>>>>>>
>>>>>>>> Interestingly, the file changes again when VS is loaded/quit
>>>>>>>> (attached). I manually merged old/new and everything seems ok
>>>>>>>> (attached)
>>>>>>>>
>>>>>>>> Ronnie
>>>>>>>>
>>>>>>>>> Hello Dmitry,
>>>>>>>>>
>>>>>>>>> It canged (and seemed to lose the 'CodeStyleSettings' section
>>>>>>>>> amongst others - see attached.
>>>>>>>>>
>>>>>>>>> Ronnie
>>>>>>>>>
>>>>>>>>>> Ronnie,
>>>>>>>>>>
>>>>>>>>>> R# formatting preferences are kept in the UserSettings.xml
>>>>>>>>>> file
>>>>>>>>>> located in
>>>>>>>>>> your user directory. This file
>>>>>>>>>> should not be overwritten during installation. Could you
>>>>>>>>>> please
>>>>>>>>>> check
>>>>>>>>>> next
>>>>>>>>>> time you install ReSharper if
>>>>>>>>>> it is not really overwritten for you?
>>>>>>>>>> Regards,
>>>>>>>>>> Dmitry Shaporenkov
>>>>>>>>>> JetBrains, Inc
>>>>>>>>>> http://www.jetbrains.com
>>>>>>>>>> "Develop with pleasure!"
>>>>>>>>>>> Hello Dmitry,
>>>>>>>>>>>
>>>>>>>>>>> I have seen the workaround before - maybe I should have
>>>>>>>>>>> started a new thread. I have noticed that when installing a
>>>>>>>>>>> new version I lose my R# code formatting preferences (like #
>>>>>>>>>>> lines between classes etc.)
>>>>>>>>>>>
>>>>>>>>>>> Ronnie
>>>>>>>>>>>
>>>>>>>>>>>> Hello Ronnie,
>>>>>>>>>>>>
>>>>>>>>>>>> it appears the problem with custom toolbars is discussed in
>>>>>>>>>>>> two
>>>>>>>>>>>> threads concurrently.
>>>>>>>>>>>> Look at the thread 'custom toolbars are gone again' started
>>>>>>>>>>>> by
>>>>>>>>>>>> Michael
>>>>>>>>>>>> -
>>>>>>>>>>>> it seems we've
>>>>>>>>>>>> found a feasible workaround for this bug of VS 2003.
>>>>>>>>>>>> Regards,
>>>>>>>>>>>> Dmitry Shaporenkov
>>>>>>>>>>>> JetBrains, Inc
>>>>>>>>>>>> http://www.jetbrains.com
>>>>>>>>>>>> "Develop with pleasure!"
>>>>>>>>>>>>> Hello Paul,
>>>>>>>>>>>>>
>>>>>>>>>>>>> Is this problem limited to toolbars? All my
>>>>>>>>>>>>> code-formatting options are disapearing after each
>>>>>>>>>>>>> upgrade!
>>>>>>>>>>>>>
>>>>>>>>>>>>> Ronnie
>>>>>>>>>>>>>
>>>>>>>>>>>>>> I had the same experience.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> I since had to uninstall 2.0 and go back to 1.5. I
>>>>>>>>>>>>>> experienced the same problem there. After remaking some
>>>>>>>>>>>>>> changes to the toolbars once 2.0 was installed,
>>>>>>>>>>>>>> uninstalling 2.0 and installing 1.5 caused those to be
>>>>>>>>>>>>>> lost again.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> This is on VS.Net 2003.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> "Jeff" <jeffwalsh@hotmail.com> wrote in message
>>>>>>>>>>>>>> news:dblhdo$9s9$1@is.intellij.net...
>>>>>>>>>>>>>>> I don't have custom toolbars but I did have custom
>>>>>>>>>>>>>>> buttons added to existing toolbars.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> They were lost after installing 201.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Immediately after the new install, I got a error when
>>>>>>>>>>>>>>> starting VS (2003) and had to start it again. That's
>>>>>>>>>>>>>>> when the toolbar mods were gone.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> PS How about adding a way to save the existing toolbar
>>>>>>>>>>>>>>> configuration so it could be restored in cases like
>>>>>>>>>>>>>>> this? This has always been annoying.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Thanks,
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Jeff
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> "Michael Reukauff" <mreukauff@gmx.net> wrote in message
>>>>>>>>>>>>>>> news:dbla65$vj5$1@is.intellij.net...
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Hi
>>>>>>>>>>>>>>>> I checked out R# 2.0 this morning and found some
>>>>>>>>>>>>>>>> oddness.
>>>>>>>>>>>>>>>> Most
>>>>>>>>>>>>>>>> of
>>>>>>>>>>>>>>>> them
>>>>>>>>>>>>>>>> are already mentioned by others here in the newsgroup
>>>>>>>>>>>>>>>> (i.e.
>>>>>>>>>>>>>>>> slow
>>>>>>>>>>>>>>>> startup
>>>>>>>>>>>>>>>> of VS2003, magenta lightbulb, ...)
>>>>>>>>>>>>>>>> I am using a lot of custom toolbars which are created
>>>>>>>>>>>>>>>> by
>>>>>>>>>>>>>>>> myself.
>>>>>>>>>>>>>>>> But
>>>>>>>>>>>>>>>> after the installation of R# 2.0 they are all gone!
>>>>>>>>>>>>>>>> That's
>>>>>>>>>>>>>>>> bad.
>>>>>>>>>>>>>>>> I
>>>>>>>>>>>>>>>> invested a couple of hours in building these toolbars,
>>>>>>>>>>>>>>>> they
>>>>>>>>>>>>>>>> are
>>>>>>>>>>>>>>>> a
>>>>>>>>>>>>>>>> great timesaver for my work. Do you know how I can save
>>>>>>>>>>>>>>>> them
>>>>>>>>>>>>>>>> before
>>>>>>>>>>>>>>>> installation of R# and restore them after the
>>>>>>>>>>>>>>>> installation?
>>>>>>>>>>>>>>>> Is there a new R# 2.0 Default Keymap available as for
>>>>>>>>>>>>>>>> 1.5
>>>>>>>>>>>>>>>> ?
>>>>>>>>>>>>>>>> Thanks for R#. It is a great tool.
>>>>>>>>>>>>>>>> Bye
>>>>>>>>>>>>>>>> Michael


0
Comment actions Permalink

Hello Dmitry,

Look forward to 208

Ronnie

OK, it looks like it really was a bug - the existence of custom colors
was
not checked and they
simply were overwritten. Fixed now.
Regards,
Dmitry Shaporenkov
JetBrains, Inc
http://www.jetbrains.com
"Develop with pleasure!"

>> Hello Dmitry,
>>
>> Thanks - I will look more carefully when 208 comes out too!
>>
>> Ronnie
>>
>>> Hello Ronnie,
>>>
>>> during installation ReSharper installs custom colors for some of its
>>> display
>>> items
>>> into registry. Of course, it should not overwrite user's custom
>>> colors
>>> if
>>> there are any.
>>> I'll check if it really works as it should.
>>> Regards,
>>> Dmitry Shaporenkov
>>> JetBrains, Inc
>>> http://www.jetbrains.com
>>> "Develop with pleasure!"
>>>> Hello Dmitry,
>>>>
>>>> As I sent the post I realised that they are probably in the
>>>> registry - I remember having an issue with colours in the past!
>>>>
>>>> Anyway, YES I mean that I have been losing the custom colours for
>>>> Read / Write Usage - I think every new v2 build so far!
>>>>
>>>> Ronnie
>>>> VS2003, R#207
>>>>> Hello Ronnie,
>>>>>
>>>>> do you mean you've lost your custom colors for Read/Write Usage
>>>>> display items?
>>>>> They
>>>>> are not kept in the UserSettings.xml file, but are stored in the
>>>>> registry.
>>>>> Regards,
>>>>> Dmitry Shaporenkov
>>>>> JetBrains, Inc
>>>>> http://www.jetbrains.com
>>>>> "Develop with pleasure!"
>>>>>> Back to this - after installing 207 I notice that settings are
>>>>>> still getting lost - so far I have noticed that the Read / Write
>>>>>> Usage colours are lost!
>>>>>>
>>>>>>> Hello Dmitry,
>>>>>>>
>>>>>>> The procedure that I followed was:
>>>>>>> Copy file
>>>>>>> Install Resharper 205
>>>>>>> Copy file
>>>>>>> Open VS
>>>>>>> Close VS
>>>>>>> Copy file
>>>>>>> It definately changed during the install procedure
>>>>>>>> Hello Ronnie,
>>>>>>>>
>>>>>>>> surely, this file is saved when you close VS, and loaded when
>>>>>>>> you
>>>>>>>> run
>>>>>>>> it
>>>>>>>> or activate ReSharper - that's totally OK.
>>>>>>>> Are you sure that the file has been changed during installation
>>>>>>>> and
>>>>>>>> not later?
>>>>>>>> I would presume it should be kept in
>>>>>>>> its place during installation, then loaded into the
>>>>>>>> VS/ReSharper
>>>>>>>> with
>>>>>>>> old
>>>>>>>> settings.
>>>>>>>> Regards,
>>>>>>>> Dmitry Shaporenkov
>>>>>>>> JetBrains, Inc
>>>>>>>> http://www.jetbrains.com
>>>>>>>> "Develop with pleasure!"
>>>>>>>>> Hello Ronnie,
>>>>>>>>>
>>>>>>>>> Interestingly, the file changes again when VS is loaded/quit
>>>>>>>>> (attached). I manually merged old/new and everything seems ok
>>>>>>>>> (attached)
>>>>>>>>>
>>>>>>>>> Ronnie
>>>>>>>>>
>>>>>>>>>> Hello Dmitry,
>>>>>>>>>>
>>>>>>>>>> It canged (and seemed to lose the 'CodeStyleSettings' section
>>>>>>>>>> amongst others - see attached.
>>>>>>>>>>
>>>>>>>>>> Ronnie
>>>>>>>>>>
>>>>>>>>>>> Ronnie,
>>>>>>>>>>>
>>>>>>>>>>> R# formatting preferences are kept in the UserSettings.xml
>>>>>>>>>>> file
>>>>>>>>>>> located in
>>>>>>>>>>> your user directory. This file
>>>>>>>>>>> should not be overwritten during installation. Could you
>>>>>>>>>>> please
>>>>>>>>>>> check
>>>>>>>>>>> next
>>>>>>>>>>> time you install ReSharper if
>>>>>>>>>>> it is not really overwritten for you?
>>>>>>>>>>> Regards,
>>>>>>>>>>> Dmitry Shaporenkov
>>>>>>>>>>> JetBrains, Inc
>>>>>>>>>>> http://www.jetbrains.com
>>>>>>>>>>> "Develop with pleasure!"
>>>>>>>>>>>> Hello Dmitry,
>>>>>>>>>>>>
>>>>>>>>>>>> I have seen the workaround before - maybe I should have
>>>>>>>>>>>> started a new thread. I have noticed that when installing a
>>>>>>>>>>>> new version I lose my R# code formatting preferences (like
>>>>>>>>>>>> # lines between classes etc.)
>>>>>>>>>>>>
>>>>>>>>>>>> Ronnie
>>>>>>>>>>>>
>>>>>>>>>>>>> Hello Ronnie,
>>>>>>>>>>>>>
>>>>>>>>>>>>> it appears the problem with custom toolbars is discussed
>>>>>>>>>>>>> in
>>>>>>>>>>>>> two
>>>>>>>>>>>>> threads concurrently.
>>>>>>>>>>>>> Look at the thread 'custom toolbars are gone again'
>>>>>>>>>>>>> started
>>>>>>>>>>>>> by
>>>>>>>>>>>>> Michael
>>>>>>>>>>>>> -
>>>>>>>>>>>>> it seems we've
>>>>>>>>>>>>> found a feasible workaround for this bug of VS 2003.
>>>>>>>>>>>>> Regards,
>>>>>>>>>>>>> Dmitry Shaporenkov
>>>>>>>>>>>>> JetBrains, Inc
>>>>>>>>>>>>> http://www.jetbrains.com
>>>>>>>>>>>>> "Develop with pleasure!"
>>>>>>>>>>>>>> Hello Paul,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Is this problem limited to toolbars? All my
>>>>>>>>>>>>>> code-formatting options are disapearing after each
>>>>>>>>>>>>>> upgrade!
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Ronnie
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> I had the same experience.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> I since had to uninstall 2.0 and go back to 1.5. I
>>>>>>>>>>>>>>> experienced the same problem there. After remaking some
>>>>>>>>>>>>>>> changes to the toolbars once 2.0 was installed,
>>>>>>>>>>>>>>> uninstalling 2.0 and installing 1.5 caused those to be
>>>>>>>>>>>>>>> lost again.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> This is on VS.Net 2003.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> "Jeff" <jeffwalsh@hotmail.com> wrote in message
>>>>>>>>>>>>>>> news:dblhdo$9s9$1@is.intellij.net...
>>>>>>>>>>>>>>>> I don't have custom toolbars but I did have custom
>>>>>>>>>>>>>>>> buttons added to existing toolbars.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> They were lost after installing 201.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Immediately after the new install, I got a error when
>>>>>>>>>>>>>>>> starting VS (2003) and had to start it again. That's
>>>>>>>>>>>>>>>> when the toolbar mods were gone.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> PS How about adding a way to save the existing toolbar
>>>>>>>>>>>>>>>> configuration so it could be restored in cases like
>>>>>>>>>>>>>>>> this? This has always been annoying.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Thanks,
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Jeff
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> "Michael Reukauff" <mreukauff@gmx.net> wrote in message
>>>>>>>>>>>>>>>> news:dbla65$vj5$1@is.intellij.net...
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Hi
>>>>>>>>>>>>>>>>> I checked out R# 2.0 this morning and found some
>>>>>>>>>>>>>>>>> oddness.
>>>>>>>>>>>>>>>>> Most
>>>>>>>>>>>>>>>>> of
>>>>>>>>>>>>>>>>> them
>>>>>>>>>>>>>>>>> are already mentioned by others here in the newsgroup
>>>>>>>>>>>>>>>>> (i.e.
>>>>>>>>>>>>>>>>> slow
>>>>>>>>>>>>>>>>> startup
>>>>>>>>>>>>>>>>> of VS2003, magenta lightbulb, ...)
>>>>>>>>>>>>>>>>> I am using a lot of custom toolbars which are created
>>>>>>>>>>>>>>>>> by
>>>>>>>>>>>>>>>>> myself.
>>>>>>>>>>>>>>>>> But
>>>>>>>>>>>>>>>>> after the installation of R# 2.0 they are all gone!
>>>>>>>>>>>>>>>>> That's
>>>>>>>>>>>>>>>>> bad.
>>>>>>>>>>>>>>>>> I
>>>>>>>>>>>>>>>>> invested a couple of hours in building these toolbars,
>>>>>>>>>>>>>>>>> they
>>>>>>>>>>>>>>>>> are
>>>>>>>>>>>>>>>>> a
>>>>>>>>>>>>>>>>> great timesaver for my work. Do you know how I can
>>>>>>>>>>>>>>>>> save
>>>>>>>>>>>>>>>>> them
>>>>>>>>>>>>>>>>> before
>>>>>>>>>>>>>>>>> installation of R# and restore them after the
>>>>>>>>>>>>>>>>> installation?
>>>>>>>>>>>>>>>>> Is there a new R# 2.0 Default Keymap available as for
>>>>>>>>>>>>>>>>> 1.5
>>>>>>>>>>>>>>>>> ?
>>>>>>>>>>>>>>>>> Thanks for R#. It is a great tool.
>>>>>>>>>>>>>>>>> Bye
>>>>>>>>>>>>>>>>> Michael


0

Please sign in to leave a comment.