[215] Error on startup

I just installed build 215 for VS2005 and get an error message when starting
VS2005 that says:
"Resharper has failed to retrieve one of its Fonts and Colors entries
('ReSharper Currentl Line')."

I attached a .png of the error message. After the error, the project loads
and ReSharper seems to work ok.

-mark





Attachment(s):
eap215error.PNG
20 comments
Comment actions Permalink

Getting the same thing here.
MBS wrote:

I just installed build 215 for VS2005 and get an error message when starting
VS2005 that says:
"Resharper has failed to retrieve one of its Fonts and Colors entries
('ReSharper Currentl Line')."

I attached a .png of the error message. After the error, the project loads
and ReSharper seems to work ok.

-mark


0
Comment actions Permalink

I had the same problem. Even after running "devenv.exe /setup" this
message occurred each time I launched VS2005. I uninstalled then
reinstalled 215 and the problem went away.

- Nate



Greg Fodor wrote:

Getting the same thing here.
MBS wrote:

>> I just installed build 215 for VS2005 and get an error message when
>> starting VS2005 that says:
>> "Resharper has failed to retrieve one of its Fonts and Colors entries
>> ('ReSharper Currentl Line')."
>>
>> I attached a .png of the error message. After the error, the project
>> loads and ReSharper seems to work ok.
>>
>> -mark
>>
>>

0
Comment actions Permalink

I just tried uninstalling/reinstalling 215 and still get the error. I never
ran "devenv.exe /setup" though.

-mark


0
Comment actions Permalink

Hello MBS,

this warning is not spurious and means that you can't see some of ReSharper
display items
via the VS's Font and Colors dialog. First, please try to do what the message
box suggests - running 'devenv.exe /setup' from the command
line. If this doesn't help, post here the contents of the HKLM\Software\Microsoft\VisualStudio\8.0\Text
Editor\External Markers
registry key. Most likely this key contains some invalid entries which prevent
VS from correct
reading of color information (it skips any subkeys after an invalid subkey).
One such situation is that if you tried to use NERPA plugin and
then did not uninstall it correctly.


Regards,
Dmitry Shaporenkov
JetBrains, Inc
http://www.jetbrains.com
"Develop with pleasure!"

I just tried uninstalling/reinstalling 215 and still get the error. I
never ran "devenv.exe /setup" though.

-mark



0
Comment actions Permalink

Hello Dmitry,

I ran 'devenv /setup' from the command line and am still getting the error.
I attached a text file containing the contents of my registry key:
HKLM\Software\Microsoft\VisualStudio\8.0\TextEditor\External Markers

I haven't used the NERPA plugin.

Regards,
mark


"Dmitry Shaporenkov (JetBrains)" <dsha@jetbrains.com> wrote in message
news:c8a894d9e97c78c7ed56164df0f1@news.intellij.net...

Hello MBS,

>

this warning is not spurious and means that you can't see some of
ReSharper
display items
via the VS's Font and Colors dialog. First, please try to do what the
message
box suggests - running 'devenv.exe /setup' from the command
line. If this doesn't help, post here the contents of the
HKLM\Software\Microsoft\VisualStudio\8.0\Text
Editor\External Markers
registry key. Most likely this key contains some invalid entries which
prevent
VS from correct
reading of color information (it skips any subkeys after an invalid
subkey).
One such situation is that if you tried to use NERPA plugin and
then did not uninstall it correctly.

>
>

Regards,
Dmitry Shaporenkov
JetBrains, Inc
http://www.jetbrains.com
"Develop with pleasure!"

>
>> I just tried uninstalling/reinstalling 215 and still get the error. I
>> never ran "devenv.exe /setup" though.
>>
>> -mark
>>
>






Attachment(s):
ExternalMarkers.txt
0
Comment actions Permalink

I don't see any problem in the attached file. Have you closed all instances
of VS before running 'devenv.exe /setup'? Also please make sure that you're
waiting
for this command to finish, as this operation normally takes a while to complete
(approx. 1 minute),
and not run any other instances of VS during that time.

Regards,
Dmitry Shaporenkov
JetBrains, Inc
http://www.jetbrains.com
"Develop with pleasure!"

Hello Dmitry,

I ran 'devenv /setup' from the command line and am still getting the
error. I attached a text file containing the contents of my registry
key: HKLM\Software\Microsoft\VisualStudio\8.0\TextEditor\External
Markers

I haven't used the NERPA plugin.

Regards,
mark
"Dmitry Shaporenkov (JetBrains)" <dsha@jetbrains.com> wrote in message
news:c8a894d9e97c78c7ed56164df0f1@news.intellij.net...

>> Hello MBS,
>>
>> this warning is not spurious and means that you can't see some of
>> ReSharper
>> display items
>> via the VS's Font and Colors dialog. First, please try to do what the
>> message
>> box suggests - running 'devenv.exe /setup' from the command
>> line. If this doesn't help, post here the contents of the
>> HKLM\Software\Microsoft\VisualStudio\8.0\Text
>> Editor\External Markers
>> registry key. Most likely this key contains some invalid entries
>> which
>> prevent
>> VS from correct
>> reading of color information (it skips any subkeys after an invalid
>> subkey).
>> One such situation is that if you tried to use NERPA plugin and
>> then did not uninstall it correctly.
>> Regards,
>> Dmitry Shaporenkov
>> JetBrains, Inc
>> http://www.jetbrains.com
>> "Develop with pleasure!"
>>> I just tried uninstalling/reinstalling 215 and still get the error.
>>> I never ran "devenv.exe /setup" though.
>>>
>>> -mark
>>>


0
Comment actions Permalink

I closed everything before running 'devenv /setup' and waited for it to
complete. It seemed to run ok, lot's of disk activity then came back to the
command prompt with no messages.

To make sure, I just rebooted and reran the 'devenv /setup' again, but am
still getting the error.

-mark

"Dmitry Shaporenkov (JetBrains)" <dsha@jetbrains.com> wrote in message
news:c8a894d9e98b48c7ed631ab9b0c9@news.intellij.net...
>I don't see any problem in the attached file. Have you closed all instances

of VS before running 'devenv.exe /setup'? Also please make sure that
you're waiting
for this command to finish, as this operation normally takes a while to
complete (approx. 1 minute),
and not run any other instances of VS during that time.

>

Regards,
Dmitry Shaporenkov
JetBrains, Inc
http://www.jetbrains.com
"Develop with pleasure!"

>
>> Hello Dmitry,
>>
>> I ran 'devenv /setup' from the command line and am still getting the
>> error. I attached a text file containing the contents of my registry
>> key: HKLM\Software\Microsoft\VisualStudio\8.0\TextEditor\External
>> Markers
>>
>> I haven't used the NERPA plugin.
>>
>> Regards,
>> mark
>> "Dmitry Shaporenkov (JetBrains)" <dsha@jetbrains.com> wrote in message
>> news:c8a894d9e97c78c7ed56164df0f1@news.intellij.net...
>>
>>> Hello MBS,
>>>
>>> this warning is not spurious and means that you can't see some of
>>> ReSharper
>>> display items
>>> via the VS's Font and Colors dialog. First, please try to do what the
>>> message
>>> box suggests - running 'devenv.exe /setup' from the command
>>> line. If this doesn't help, post here the contents of the
>>> HKLM\Software\Microsoft\VisualStudio\8.0\Text
>>> Editor\External Markers
>>> registry key. Most likely this key contains some invalid entries
>>> which
>>> prevent
>>> VS from correct
>>> reading of color information (it skips any subkeys after an invalid
>>> subkey).
>>> One such situation is that if you tried to use NERPA plugin and
>>> then did not uninstall it correctly.
>>> Regards,
>>> Dmitry Shaporenkov
>>> JetBrains, Inc
>>> http://www.jetbrains.com
>>> "Develop with pleasure!"
>>>> I just tried uninstalling/reinstalling 215 and still get the error.
>>>> I never ran "devenv.exe /setup" though.
>>>>
>>>> -mark
>>>>
>



0
Comment actions Permalink

Hello Dmitry,

It seems, that problem is caused by Resharper itself.
After deleting VSK file in "C:\Documents and Settings\orangy\Application
Data\Microsoft\VisualStudio\7.1\" folder and running devenv /setup, VS starts
ok, creates new VSK file and closes without a problem. Second start shows
the message about external markers. I reinstalled Resharper several time,
but message box is still there. However, in Fonts & Colors I can see "Resharper
Current Line" settings. May be detection of a problem is wrong and message
box is displayed, when no problem exist?


DS> I don't see any problem in the attached file. Have you closed all
DS> instances
DS> of VS before running 'devenv.exe /setup'? Also please make sure that
DS> you're
DS> waiting
DS> for this command to finish, as this operation normally takes a while
DS> to complete
DS> (approx. 1 minute),
DS> and not run any other instances of VS during that time.
DS> Regards,
DS> Dmitry Shaporenkov
DS> JetBrains, Inc
DS> http://www.jetbrains.com
DS> "Develop with pleasure!"
>> Hello Dmitry,
>>
>> I ran 'devenv /setup' from the command line and am still getting the
>> error. I attached a text file containing the contents of my registry
>> key: HKLM\Software\Microsoft\VisualStudio\8.0\TextEditor\External
>> Markers
>>
>> I haven't used the NERPA plugin.
>>
>> Regards,
>> mark
>> "Dmitry Shaporenkov (JetBrains)" <dsha@jetbrains.com> wrote in
>> message
>> news:c8a894d9e97c78c7ed56164df0f1@news.intellij.net...
>>> Hello MBS,
>>>
>>> this warning is not spurious and means that you can't see some of
>>> ReSharper
>>> display items
>>> via the VS's Font and Colors dialog. First, please try to do what
>>> the
>>> message
>>> box suggests - running 'devenv.exe /setup' from the command
>>> line. If this doesn't help, post here the contents of the
>>> HKLM\Software\Microsoft\VisualStudio\8.0\Text
>>> Editor\External Markers
>>> registry key. Most likely this key contains some invalid entries
>>> which
>>> prevent
>>> VS from correct
>>> reading of color information (it skips any subkeys after an invalid
>>> subkey).
>>> One such situation is that if you tried to use NERPA plugin and
>>> then did not uninstall it correctly.
>>> Regards,
>>> Dmitry Shaporenkov
>>> JetBrains, Inc
>>> http://www.jetbrains.com
>>> "Develop with pleasure!"
>>>> I just tried uninstalling/reinstalling 215 and still get the error.
>>>> I never ran "devenv.exe /setup" though.
>>>>
>>>> -mark
>>>>
Sincerely,
Ilya Ryzhenkov


0
Comment actions Permalink

Hello MBS,

after launching VS, can you see 'ReSharper Current Line' display item in the
Fonts and Colors dialog?


Regards,
Dmitry Shaporenkov
JetBrains, Inc
http://www.jetbrains.com
"Develop with pleasure!"

I closed everything before running 'devenv /setup' and waited for it
to complete. It seemed to run ok, lot's of disk activity then came
back to the command prompt with no messages.

To make sure, I just rebooted and reran the 'devenv /setup' again, but
am still getting the error.

-mark

"Dmitry Shaporenkov (JetBrains)" <dsha@jetbrains.com> wrote in message
news:c8a894d9e98b48c7ed631ab9b0c9@news.intellij.net...

>> I don't see any problem in the attached file. Have you closed all
>> instances
>> of VS before running 'devenv.exe /setup'? Also please make sure that
>> you're waiting
>> for this command to finish, as this operation normally takes a while
>> to
>> complete (approx. 1 minute),
>> and not run any other instances of VS during that time.
>> Regards,
>> Dmitry Shaporenkov
>> JetBrains, Inc
>> http://www.jetbrains.com
>> "Develop with pleasure!"
>>> Hello Dmitry,
>>>
>>> I ran 'devenv /setup' from the command line and am still getting the
>>> error. I attached a text file containing the contents of my registry
>>> key: HKLM\Software\Microsoft\VisualStudio\8.0\TextEditor\External
>>> Markers
>>>
>>> I haven't used the NERPA plugin.
>>>
>>> Regards,
>>> mark
>>> "Dmitry Shaporenkov (JetBrains)" <dsha@jetbrains.com> wrote in
>>> message
>>> news:c8a894d9e97c78c7ed56164df0f1@news.intellij.net...
>>>> Hello MBS,
>>>>
>>>> this warning is not spurious and means that you can't see some of
>>>> ReSharper
>>>> display items
>>>> via the VS's Font and Colors dialog. First, please try to do what
>>>> the
>>>> message
>>>> box suggests - running 'devenv.exe /setup' from the command
>>>> line. If this doesn't help, post here the contents of the
>>>> HKLM\Software\Microsoft\VisualStudio\8.0\Text
>>>> Editor\External Markers
>>>> registry key. Most likely this key contains some invalid entries
>>>> which
>>>> prevent
>>>> VS from correct
>>>> reading of color information (it skips any subkeys after an invalid
>>>> subkey).
>>>> One such situation is that if you tried to use NERPA plugin and
>>>> then did not uninstall it correctly.
>>>> Regards,
>>>> Dmitry Shaporenkov
>>>> JetBrains, Inc
>>>> http://www.jetbrains.com
>>>> "Develop with pleasure!"
>>>>> I just tried uninstalling/reinstalling 215 and still get the
>>>>> error. I never ran "devenv.exe /setup" though.
>>>>>
>>>>> -mark
>>>>>


0
Comment actions Permalink

Hello Ilya,

I'll try this scenario. The message box appears if ReSharper can't retrieve
color of the 'ReSharper Current Line'
display item via the VS API. Under an assumption about reasonable behavior
of that API,
the message box should appear exactly when the respective display item is
missing in Fonts and Colors.
Of course, may be the assumption itself is not reasonable...

Regards,
Dmitry Shaporenkov
JetBrains, Inc
http://www.jetbrains.com
"Develop with pleasure!"

Hello Dmitry,

It seems, that problem is caused by Resharper itself. After deleting
VSK file in "C:\Documents and Settings\orangy\Application
Data\Microsoft\VisualStudio\7.1\" folder and running devenv /setup, VS
starts ok, creates new VSK file and closes without a problem. Second
start shows the message about external markers. I reinstalled
Resharper several time, but message box is still there. However, in
Fonts & Colors I can see "Resharper Current Line" settings. May be
detection of a problem is wrong and message box is displayed, when no
problem exist?

DS>> I don't see any problem in the attached file. Have you closed all
DS>> instances
DS>> of VS before running 'devenv.exe /setup'? Also please make sure
DS>> that
DS>> you're
DS>> waiting
DS>> for this command to finish, as this operation normally takes a
DS>> while
DS>> to complete
DS>> (approx. 1 minute),
DS>> and not run any other instances of VS during that time.
DS>> Regards,
DS>> Dmitry Shaporenkov
DS>> JetBrains, Inc
DS>> http://www.jetbrains.com
DS>> "Develop with pleasure!"
>>> Hello Dmitry,
>>>
>>> I ran 'devenv /setup' from the command line and am still getting the
>>> error. I attached a text file containing the contents of my registry
>>> key: HKLM\Software\Microsoft\VisualStudio\8.0\TextEditor\External
>>> Markers
>>>
>>> I haven't used the NERPA plugin.
>>>
>>> Regards,
>>> mark
>>> "Dmitry Shaporenkov (JetBrains)" <dsha@jetbrains.com> wrote in
>>> message
>>> news:c8a894d9e97c78c7ed56164df0f1@news.intellij.net...
>>>> Hello MBS,
>>>>
>>>> this warning is not spurious and means that you can't see some of
>>>> ReSharper
>>>> display items
>>>> via the VS's Font and Colors dialog. First, please try to do what
>>>> the
>>>> message
>>>> box suggests - running 'devenv.exe /setup' from the command
>>>> line. If this doesn't help, post here the contents of the
>>>> HKLM\Software\Microsoft\VisualStudio\8.0\Text
>>>> Editor\External Markers
>>>> registry key. Most likely this key contains some invalid entries
>>>> which
>>>> prevent
>>>> VS from correct
>>>> reading of color information (it skips any subkeys after an invalid
>>>> subkey).
>>>> One such situation is that if you tried to use NERPA plugin and
>>>> then did not uninstall it correctly.
>>>> Regards,
>>>> Dmitry Shaporenkov
>>>> JetBrains, Inc
>>>> http://www.jetbrains.com
>>>> "Develop with pleasure!"
>>>>> I just tried uninstalling/reinstalling 215 and still get the
>>>>> error. I never ran "devenv.exe /setup" though.
>>>>>
>>>>> -mark
>>>>>

Sincerely,
Ilya Ryzhenkov



0
Comment actions Permalink

No, I don't see any Rehsarper settings in the Fonts and Colors dialog. I
attached a screenshot of my dialog, and I scrolled the list of options down
to the R's, looking for ReSharper.

-mark

"Dmitry Shaporenkov (JetBrains)" <dsha@jetbrains.com> wrote in message
news:c8a894d9e9a3d8c7ed76ff1e38c9@news.intellij.net...

Hello MBS,

>

after launching VS, can you see 'ReSharper Current Line' display item in
the
Fonts and Colors dialog?

>
>

Regards,
Dmitry Shaporenkov
JetBrains, Inc
http://www.jetbrains.com
"Develop with pleasure!"

>
>> I closed everything before running 'devenv /setup' and waited for it
>> to complete. It seemed to run ok, lot's of disk activity then came
>> back to the command prompt with no messages.
>>
>> To make sure, I just rebooted and reran the 'devenv /setup' again, but
>> am still getting the error.
>>
>> -mark
>>
>> "Dmitry Shaporenkov (JetBrains)" <dsha@jetbrains.com> wrote in message
>> news:c8a894d9e98b48c7ed631ab9b0c9@news.intellij.net...
>>
>>> I don't see any problem in the attached file. Have you closed all
>>> instances
>>> of VS before running 'devenv.exe /setup'? Also please make sure that
>>> you're waiting
>>> for this command to finish, as this operation normally takes a while
>>> to
>>> complete (approx. 1 minute),
>>> and not run any other instances of VS during that time.
>>> Regards,
>>> Dmitry Shaporenkov
>>> JetBrains, Inc
>>> http://www.jetbrains.com
>>> "Develop with pleasure!"
>>>> Hello Dmitry,
>>>>
>>>> I ran 'devenv /setup' from the command line and am still getting the
>>>> error. I attached a text file containing the contents of my registry
>>>> key: HKLM\Software\Microsoft\VisualStudio\8.0\TextEditor\External
>>>> Markers
>>>>
>>>> I haven't used the NERPA plugin.
>>>>
>>>> Regards,
>>>> mark
>>>> "Dmitry Shaporenkov (JetBrains)" <dsha@jetbrains.com> wrote in
>>>> message
>>>> news:c8a894d9e97c78c7ed56164df0f1@news.intellij.net...
>>>>> Hello MBS,
>>>>>
>>>>> this warning is not spurious and means that you can't see some of
>>>>> ReSharper
>>>>> display items
>>>>> via the VS's Font and Colors dialog. First, please try to do what
>>>>> the
>>>>> message
>>>>> box suggests - running 'devenv.exe /setup' from the command
>>>>> line. If this doesn't help, post here the contents of the
>>>>> HKLM\Software\Microsoft\VisualStudio\8.0\Text
>>>>> Editor\External Markers
>>>>> registry key. Most likely this key contains some invalid entries
>>>>> which
>>>>> prevent
>>>>> VS from correct
>>>>> reading of color information (it skips any subkeys after an invalid
>>>>> subkey).
>>>>> One such situation is that if you tried to use NERPA plugin and
>>>>> then did not uninstall it correctly.
>>>>> Regards,
>>>>> Dmitry Shaporenkov
>>>>> JetBrains, Inc
>>>>> http://www.jetbrains.com
>>>>> "Develop with pleasure!"
>>>>>> I just tried uninstalling/reinstalling 215 and still get the
>>>>>> error. I never ran "devenv.exe /setup" though.
>>>>>>
>>>>>> -mark
>>>>>>
>






Attachment(s):
fontscolors.png
0
Comment actions Permalink

mbs wrote:

No, I don't see any Rehsarper settings in the Fonts and Colors dialog. I
attached a screenshot of my dialog, and I scrolled the list of options down
to the R's, looking for ReSharper.

-mark

"Dmitry Shaporenkov (JetBrains)" <dsha@jetbrains.com> wrote in message
news:c8a894d9e9a3d8c7ed76ff1e38c9@news.intellij.net...

>>Hello MBS,
>>
>>after launching VS, can you see 'ReSharper Current Line' display item in
>>the
>>Fonts and Colors dialog?
>>
>>
>>Regards,
>>Dmitry Shaporenkov
>>JetBrains, Inc
>>http://www.jetbrains.com
>>"Develop with pleasure!"
>>
>>
>>>I closed everything before running 'devenv /setup' and waited for it
>>>to complete. It seemed to run ok, lot's of disk activity then came
>>>back to the command prompt with no messages.
>>>
>>>To make sure, I just rebooted and reran the 'devenv /setup' again, but
>>>am still getting the error.
>>>
>>>-mark
>>>
>>>"Dmitry Shaporenkov (JetBrains)" <dsha@jetbrains.com> wrote in message
>>>news:c8a894d9e98b48c7ed631ab9b0c9@news.intellij.net...
>>>
>>>
>>>>I don't see any problem in the attached file. Have you closed all
>>>>instances
>>>>of VS before running 'devenv.exe /setup'? Also please make sure that
>>>>you're waiting
>>>>for this command to finish, as this operation normally takes a while
>>>>to
>>>>complete (approx. 1 minute),
>>>>and not run any other instances of VS during that time.
>>>>Regards,
>>>>Dmitry Shaporenkov
>>>>JetBrains, Inc
>>>>http://www.jetbrains.com
>>>>"Develop with pleasure!"
>>>>
>>>>>Hello Dmitry,
>>>>>
>>>>>I ran 'devenv /setup' from the command line and am still getting the
>>>>>error. I attached a text file containing the contents of my registry
>>>>>key: HKLM\Software\Microsoft\VisualStudio\8.0\TextEditor\External
>>>>>Markers
>>>>>
>>>>>I haven't used the NERPA plugin.
>>>>>
>>>>>Regards,
>>>>>mark
>>>>>"Dmitry Shaporenkov (JetBrains)" <dsha@jetbrains.com> wrote in
>>>>>message
>>>>>news:c8a894d9e97c78c7ed56164df0f1@news.intellij.net...
>>>>>
>>>>>>Hello MBS,
>>>>>>
>>>>>>this warning is not spurious and means that you can't see some of
>>>>>>ReSharper
>>>>>>display items
>>>>>>via the VS's Font and Colors dialog. First, please try to do what
>>>>>>the
>>>>>>message
>>>>>>box suggests - running 'devenv.exe /setup' from the command
>>>>>>line. If this doesn't help, post here the contents of the
>>>>>>HKLM\Software\Microsoft\VisualStudio\8.0\Text
>>>>>>Editor\External Markers
>>>>>>registry key. Most likely this key contains some invalid entries
>>>>>>which
>>>>>>prevent
>>>>>>VS from correct
>>>>>>reading of color information (it skips any subkeys after an invalid
>>>>>>subkey).
>>>>>>One such situation is that if you tried to use NERPA plugin and
>>>>>>then did not uninstall it correctly.
>>>>>>Regards,
>>>>>>Dmitry Shaporenkov
>>>>>>JetBrains, Inc
>>>>>>http://www.jetbrains.com
>>>>>>"Develop with pleasure!"
>>>>>>
>>>>>>>I just tried uninstalling/reinstalling 215 and still get the
>>>>>>>error. I never ran "devenv.exe /setup" though.
>>>>>>>
>>>>>>>-mark
>>>>>>>
>>
>>


Have been through the same processes already discussed and get exactly
the same problem.

Ed Dargan

0
Comment actions Permalink

Do you see ReSharper entries in the 'Printer' category (there is a combo box
for selecting category in that dialog, and it is set to 'Text Editor' by
default)?

Regards,
Dmitry Shaporenkov
JetBrains, Inc
http://www.jetbrains.com
"Develop with pleasure!"

mbs wrote:

>> No, I don't see any Rehsarper settings in the Fonts and Colors
>> dialog. I attached a screenshot of my dialog, and I scrolled the list
>> of options down to the R's, looking for ReSharper.
>>
>> -mark
>>
>> "Dmitry Shaporenkov (JetBrains)" <dsha@jetbrains.com> wrote in
>> message news:c8a894d9e9a3d8c7ed76ff1e38c9@news.intellij.net...
>>
>>> Hello MBS,
>>>
>>> after launching VS, can you see 'ReSharper Current Line' display
>>> item in
>>> the
>>> Fonts and Colors dialog?
>>> Regards,
>>> Dmitry Shaporenkov
>>> JetBrains, Inc
>>> http://www.jetbrains.com
>>> "Develop with pleasure!"
>>>> I closed everything before running 'devenv /setup' and waited for
>>>> it to complete. It seemed to run ok, lot's of disk activity then
>>>> came back to the command prompt with no messages.
>>>>
>>>> To make sure, I just rebooted and reran the 'devenv /setup' again,
>>>> but am still getting the error.
>>>>
>>>> -mark
>>>>
>>>> "Dmitry Shaporenkov (JetBrains)" <dsha@jetbrains.com> wrote in
>>>> message news:c8a894d9e98b48c7ed631ab9b0c9@news.intellij.net...
>>>>
>>>>> I don't see any problem in the attached file. Have you closed all
>>>>> instances
>>>>> of VS before running 'devenv.exe /setup'? Also please make sure
>>>>> that
>>>>> you're waiting
>>>>> for this command to finish, as this operation normally takes a
>>>>> while
>>>>> to
>>>>> complete (approx. 1 minute),
>>>>> and not run any other instances of VS during that time.
>>>>> Regards,
>>>>> Dmitry Shaporenkov
>>>>> JetBrains, Inc
>>>>> http://www.jetbrains.com
>>>>> "Develop with pleasure!"
>>>>>> Hello Dmitry,
>>>>>>
>>>>>> I ran 'devenv /setup' from the command line and am still getting
>>>>>> the error. I attached a text file containing the contents of my
>>>>>> registry key:
>>>>>> HKLM\Software\Microsoft\VisualStudio\8.0\TextEditor\External
>>>>>> Markers
>>>>>>
>>>>>> I haven't used the NERPA plugin.
>>>>>>
>>>>>> Regards,
>>>>>> mark
>>>>>> "Dmitry Shaporenkov (JetBrains)" <dsha@jetbrains.com> wrote in
>>>>>> message
>>>>>> news:c8a894d9e97c78c7ed56164df0f1@news.intellij.net...
>>>>>>> Hello MBS,
>>>>>>>
>>>>>>> this warning is not spurious and means that you can't see some
>>>>>>> of
>>>>>>> ReSharper
>>>>>>> display items
>>>>>>> via the VS's Font and Colors dialog. First, please try to do
>>>>>>> what
>>>>>>> the
>>>>>>> message
>>>>>>> box suggests - running 'devenv.exe /setup' from the command
>>>>>>> line. If this doesn't help, post here the contents of the
>>>>>>> HKLM\Software\Microsoft\VisualStudio\8.0\Text
>>>>>>> Editor\External Markers
>>>>>>> registry key. Most likely this key contains some invalid entries
>>>>>>> which
>>>>>>> prevent
>>>>>>> VS from correct
>>>>>>> reading of color information (it skips any subkeys after an
>>>>>>> invalid
>>>>>>> subkey).
>>>>>>> One such situation is that if you tried to use NERPA plugin and
>>>>>>> then did not uninstall it correctly.
>>>>>>> Regards,
>>>>>>> Dmitry Shaporenkov
>>>>>>> JetBrains, Inc
>>>>>>> http://www.jetbrains.com
>>>>>>> "Develop with pleasure!"
>>>>>>>> I just tried uninstalling/reinstalling 215 and still get the
>>>>>>>> error. I never ran "devenv.exe /setup" though.
>>>>>>>>
>>>>>>>> -mark
>>>>>>>>

Have been through the same processes already discussed and get exactly
the same problem.

Ed Dargan



0
Comment actions Permalink

"MBS" <a@a.com> wrote in message news:dqud23$7kc$1@is.intellij.net...

I just installed build 215 for VS2005 and get an error message when

starting

VS2005 that says:
"Resharper has failed to retrieve one of its Fonts and Colors entries
('ReSharper Currentl Line')."


Same here after uninstalling RS 213 and installing 215. No ReSharper entries
were displayed in the Fonts & Colors dialog box.

devenv /setup didn't help.

I uninstalled 215 (got the error message again in the process), reinstalled
215, the problem went away and the RS entries appeared in F&C.

This didn't happen when I installed 215 on my home computer. The only
difference I can think of at the moment is that I have VS2k3 installed here
(without RS, I don't really use this version anymore) while I don't have it
at home. I don't see how it could be relevant, but who knows :)

Lionel


0
Comment actions Permalink

I am having the same problem using VS2K3 on a W2K Professional. Second
workstation.

The problem lies in the following class + operation:

JetBrains.ReSharper.TextControl.VSIntegration.VSTextControlSchemeManager.Ref
reshColorsFromVS()

Where the colorable item "ReSharper Current Line" can not be found, complete
list of colorable items found under my signature

Gabriel Lozano-Morán
MCSD .NET
Real Software
http://www.realsoftware.be
http://www.realdn.net

Colorable items found on my system:

Plain Text
Selected Text
Inactive Selected Text
Indicator Margin
Line Numbers
Visible White Space
Brace Matching
Bookmark
Collapsible Text
Comment
Compiler Error
CSS Property Name
CSS Property Value
CSS Selector
CSS String Value
Current list location
Debugger Data Changed
Disassembly File Name
Disassembly Source
Disassembly Symbol
Disassembly Text
Excluded Code
Function Block Start
HTML Attribute Name
HTML Attribute Value
HTML Comment
HTML Element Name
HTML Entity
HTML Operator
HTML Server-Side Script
HTML String
HTML Tag Delimiter
HTML Tag Text
Identifier
Keyword
Memory Address
Memory Changed
Memory Data
Memory Unreadable
Number
Operator
Other Error
Preprocessor Keyword
Read-Only Region
Shortcut
Smart Editor Error
Stale Code
String
XML Doc Comment
XML Tag
Register Data
Register NAT


0
Comment actions Permalink

I reinstalled build 213, uninstalled it and then installed build 215 but I
still get the same error message although the "ReSharper Current Line"
exists now in the colorable item collection:

Complete list of colorable items found:

Plain Text
Selected Text
Inactive Selected Text
Indicator Margin
Line Numbers
Visible White Space
Brace Matching
Bookmark
Breakpoint Disabled
Breakpoint Enabled
Breakpoint Error
Breakpoint Warning
Call Return
Collapsible Text
Comment
Compiler Error
CSS Property Name
CSS Property Value
CSS Selector
CSS String Value
Current list location
Current Statement
Debugger Data Changed
Highlighter TEST
NVseePkgsTsScc::CDiffMergeMarkerProvider::DiffMergeConflictGroupMultilineMar
ginMarker
NVseePkgsTsScc::CDiffMergeMarkerProvider::DiffMergeDeleteBoth
NVseePkgsTsScc::CDiffMergeMarkerProvider::DiffMergeDeleteLeft
NVseePkgsTsScc::CDiffMergeMarkerProvider::DiffMergeDeleteRight
NVseePkgsTsScc::CDiffMergeMarkerProvider::DiffMergeInsertBoth
NVseePkgsTsScc::CDiffMergeMarkerProvider::DiffMergeInsertLeft
NVseePkgsTsScc::CDiffMergeMarkerProvider::DiffMergeInsertRight
Disassembly File Name
Disassembly Source
Disassembly Symbol
Disassembly Text
Excluded Code
Function Block Start
HTML Attribute Name
HTML Attribute Value
HTML Comment
HTML Element Name
HTML Entity
HTML Operator
HTML Server-Side Script
HTML String
HTML Tag Delimiter
HTML Tag Text
Identifier
Keyword
Memory Address
Memory Changed
Memory Data
Memory Unreadable
Number
Operator
Other Error
Preprocessor Keyword
Read-Only Region
Register Data
Register NAT
ReSharper Base Keyword
ReSharper Bracket Outline
ReSharper Completion Replacement Range
ReSharper Constant Identifier
ReSharper Current Line
ReSharper Dead Code
ReSharper Error Highlighting
ReSharper Event Identifier
ReSharper Field Identifier
ReSharper Hides
ReSharper Hyperlink
ReSharper Implements
ReSharper Implements And Hides
ReSharper Implements And Overrides
ReSharper LiveTemplates Current HotSpot
ReSharper Local Variable Identifier
ReSharper Matched Bracket
ReSharper Method Identifier
ReSharper Namespace Identifier
ReSharper Operator Identifier
ReSharper Overrides
ReSharper Parameter Identifier
ReSharper Read Usage
ReSharper Type Identifier
ReSharper Underlined Error Highlighting
ReSharper Unit Test Fixture
ReSharper Unit Test Method
ReSharper Unmatched Bracket
ReSharper Usage
ReSharper Warning
ReSharper Write Usage
Shortcut
Smart Editor Error
SQL DML Marker
Stale Code
String
XML Doc Comment
XML Tag


0
Comment actions Permalink

Hello Gabriel,

we observe this problem under the same conditions and will fix it in the
next build


Regards,
Dmitry Shaporenkov
JetBrains, Inc
http://www.jetbrains.com
"Develop with pleasure!"

I reinstalled build 213, uninstalled it and then installed build 215
but I still get the same error message although the "ReSharper Current
Line" exists now in the colorable item collection:

Complete list of colorable items found:

Plain Text
Selected Text
Inactive Selected Text
Indicator Margin
Line Numbers
Visible White Space
Brace Matching
Bookmark
Breakpoint Disabled
Breakpoint Enabled
Breakpoint Error
Breakpoint Warning
Call Return
Collapsible Text
Comment
Compiler Error
CSS Property Name
CSS Property Value
CSS Selector
CSS String Value
Current list location
Current Statement
Debugger Data Changed
Highlighter TEST
NVseePkgsTsScc::CDiffMergeMarkerProvider::DiffMergeConflictGroupMultil
ineMar
ginMarker
NVseePkgsTsScc::CDiffMergeMarkerProvider::DiffMergeDeleteBoth
NVseePkgsTsScc::CDiffMergeMarkerProvider::DiffMergeDeleteLeft
NVseePkgsTsScc::CDiffMergeMarkerProvider::DiffMergeDeleteRight
NVseePkgsTsScc::CDiffMergeMarkerProvider::DiffMergeInsertBoth
NVseePkgsTsScc::CDiffMergeMarkerProvider::DiffMergeInsertLeft
NVseePkgsTsScc::CDiffMergeMarkerProvider::DiffMergeInsertRight
Disassembly File Name
Disassembly Source
Disassembly Symbol
Disassembly Text
Excluded Code
Function Block Start
HTML Attribute Name
HTML Attribute Value
HTML Comment
HTML Element Name
HTML Entity
HTML Operator
HTML Server-Side Script
HTML String
HTML Tag Delimiter
HTML Tag Text
Identifier
Keyword
Memory Address
Memory Changed
Memory Data
Memory Unreadable
Number
Operator
Other Error
Preprocessor Keyword
Read-Only Region
Register Data
Register NAT
ReSharper Base Keyword
ReSharper Bracket Outline
ReSharper Completion Replacement Range
ReSharper Constant Identifier
ReSharper Current Line
ReSharper Dead Code
ReSharper Error Highlighting
ReSharper Event Identifier
ReSharper Field Identifier
ReSharper Hides
ReSharper Hyperlink
ReSharper Implements
ReSharper Implements And Hides
ReSharper Implements And Overrides
ReSharper LiveTemplates Current HotSpot
ReSharper Local Variable Identifier
ReSharper Matched Bracket
ReSharper Method Identifier
ReSharper Namespace Identifier
ReSharper Operator Identifier
ReSharper Overrides
ReSharper Parameter Identifier
ReSharper Read Usage
ReSharper Type Identifier
ReSharper Underlined Error Highlighting
ReSharper Unit Test Fixture
ReSharper Unit Test Method
ReSharper Unmatched Bracket
ReSharper Usage
ReSharper Warning
ReSharper Write Usage
Shortcut
Smart Editor Error
SQL DML Marker
Stale Code
String
XML Doc Comment
XML Tag



0
Comment actions Permalink

I do see ReSharper entries under the Printer category.
-mark

"Dmitry Shaporenkov (JetBrains)" <dsha@jetbrains.com> wrote in message
news:c8a894d9ea8ed8c7ee3b5822ea4f@news.intellij.net...

Do you see ReSharper entries in the 'Printer' category (there is a combo
box
for selecting category in that dialog, and it is set to 'Text Editor' by
default)?

>

Regards,
Dmitry Shaporenkov
JetBrains, Inc
http://www.jetbrains.com
"Develop with pleasure!"

>
>> mbs wrote:
>>
>>> No, I don't see any Rehsarper settings in the Fonts and Colors
>>> dialog. I attached a screenshot of my dialog, and I scrolled the list
>>> of options down to the R's, looking for ReSharper.
>>>
>>> -mark
>>>
>>> "Dmitry Shaporenkov (JetBrains)" <dsha@jetbrains.com> wrote in
>>> message news:c8a894d9e9a3d8c7ed76ff1e38c9@news.intellij.net...
>>>
>>>> Hello MBS,
>>>>
>>>> after launching VS, can you see 'ReSharper Current Line' display
>>>> item in
>>>> the
>>>> Fonts and Colors dialog?
>>>> Regards,
>>>> Dmitry Shaporenkov
>>>> JetBrains, Inc
>>>> http://www.jetbrains.com
>>>> "Develop with pleasure!"
>>>>> I closed everything before running 'devenv /setup' and waited for
>>>>> it to complete. It seemed to run ok, lot's of disk activity then
>>>>> came back to the command prompt with no messages.
>>>>>
>>>>> To make sure, I just rebooted and reran the 'devenv /setup' again,
>>>>> but am still getting the error.
>>>>>
>>>>> -mark
>>>>>
>>>>> "Dmitry Shaporenkov (JetBrains)" <dsha@jetbrains.com> wrote in
>>>>> message news:c8a894d9e98b48c7ed631ab9b0c9@news.intellij.net...
>>>>>
>>>>>> I don't see any problem in the attached file. Have you closed all
>>>>>> instances
>>>>>> of VS before running 'devenv.exe /setup'? Also please make sure
>>>>>> that
>>>>>> you're waiting
>>>>>> for this command to finish, as this operation normally takes a
>>>>>> while
>>>>>> to
>>>>>> complete (approx. 1 minute),
>>>>>> and not run any other instances of VS during that time.
>>>>>> Regards,
>>>>>> Dmitry Shaporenkov
>>>>>> JetBrains, Inc
>>>>>> http://www.jetbrains.com
>>>>>> "Develop with pleasure!"
>>>>>>> Hello Dmitry,
>>>>>>>
>>>>>>> I ran 'devenv /setup' from the command line and am still getting
>>>>>>> the error. I attached a text file containing the contents of my
>>>>>>> registry key:
>>>>>>> HKLM\Software\Microsoft\VisualStudio\8.0\TextEditor\External
>>>>>>> Markers
>>>>>>>
>>>>>>> I haven't used the NERPA plugin.
>>>>>>>
>>>>>>> Regards,
>>>>>>> mark
>>>>>>> "Dmitry Shaporenkov (JetBrains)" <dsha@jetbrains.com> wrote in
>>>>>>> message
>>>>>>> news:c8a894d9e97c78c7ed56164df0f1@news.intellij.net...
>>>>>>>> Hello MBS,
>>>>>>>>
>>>>>>>> this warning is not spurious and means that you can't see some
>>>>>>>> of
>>>>>>>> ReSharper
>>>>>>>> display items
>>>>>>>> via the VS's Font and Colors dialog. First, please try to do
>>>>>>>> what
>>>>>>>> the
>>>>>>>> message
>>>>>>>> box suggests - running 'devenv.exe /setup' from the command
>>>>>>>> line. If this doesn't help, post here the contents of the
>>>>>>>> HKLM\Software\Microsoft\VisualStudio\8.0\Text
>>>>>>>> Editor\External Markers
>>>>>>>> registry key. Most likely this key contains some invalid entries
>>>>>>>> which
>>>>>>>> prevent
>>>>>>>> VS from correct
>>>>>>>> reading of color information (it skips any subkeys after an
>>>>>>>> invalid
>>>>>>>> subkey).
>>>>>>>> One such situation is that if you tried to use NERPA plugin and
>>>>>>>> then did not uninstall it correctly.
>>>>>>>> Regards,
>>>>>>>> Dmitry Shaporenkov
>>>>>>>> JetBrains, Inc
>>>>>>>> http://www.jetbrains.com
>>>>>>>> "Develop with pleasure!"
>>>>>>>>> I just tried uninstalling/reinstalling 215 and still get the
>>>>>>>>> error. I never ran "devenv.exe /setup" though.
>>>>>>>>>
>>>>>>>>> -mark
>>>>>>>>>
>> Have been through the same processes already discussed and get exactly
>> the same problem.
>>
>> Ed Dargan
>>
>



0
Comment actions Permalink

It seems that this exception is not thrown on every startup of Visual
Studio. It seems that the ReSharper colorable items are sometimes not
available yet before they are accessed by the ReSharper add-in. It might be
a multi-threading issue.

Gabriel Lozano-Morán


0
Comment actions Permalink

Hello Gabriel,

we've also got such an impression. Moreover, the situation when the message
box appears,
but ReSharper entries are available seems to reproduce only in VS 2003. In
VS 2005 the message box
always means that there are no ReSharper entries in Fonts and Colors. I doubt
it is a multi-threading issue,
as all VS initialization basically happens in the primary thread, but the
problem may be in a random order
of initialization. I think the most wise action for now is to remove the
message box.

Regards,
Dmitry Shaporenkov
JetBrains, Inc
http://www.jetbrains.com
"Develop with pleasure!"

It seems that this exception is not thrown on every startup of Visual
Studio. It seems that the ReSharper colorable items are sometimes not
available yet before they are accessed by the ReSharper add-in. It
might be a multi-threading issue.

Gabriel Lozano-Morán



0

Please sign in to leave a comment.